Series 135 DESCRIPTION Solenoid valve 2 way normally closed direct acting poppet type, suitable for food applications and all compatible fluids. CONSTRUCTION Body Thermoplastic polymer ACS, KTW, W270, WRAS, NSF, FDA certified Armature tube Brass chemically nickel plated Plunger and core AISI 430FR Springs AISI 302 Seal material NBR - FPM - EPDM FEATURES Maximum allowable pressure PS 30bar Maximum fluid viscosity 25cSt (mm2/s) Ambient temperature: from -10°C to +80°C according to the coil Universal mounting position OPTIONS: Stainless steel armature tube Type N connection without nut certified coils CONNECTION P W G1/8” male thread with NUT for flexible pipes Connection Orifice COMPRESSION for flexible and semiflexible pipes HOSETAIL for flexible pipes Kv PUSH IN for semiflexible pipes Øext 6 PUSH IN for semiflexible pipes Øext 4 Coil Series Width Temp. range ** The maximum allowable pressure PS for steam is 2.5bar (gauge pressure) The maximum allowable pressure is related to the type of connection and pipe used ** The temperature range is related to the material of the seals (NBR, EPDM, FPM), and the valves’ body. Please contact us concerning the temperature range referred to the different types of c

Electrical connection DESCRIPTION Class F insulation Voltage tolerance AC +15% -10% DC ± 10% Protection class IP65 with connector fitted IP00 without connector Continuous service ED100% OPTIONS Class H insulation Cable attached Special coil voltage Special coil powers certified coils (for coil details see section 8) SPARE PARTS LIST 1. Coil fixing nut 2. Coil 3. Plunger 4. Armature tube assembly Weight with coil series 3=0.10Kg Weight with coil series 4=0.15Kg Nut max torque 2Nm Modification of technical and dimensional specification reserved Screw the nut with wrench 11 up to the sliding on...