RailTrack
2Pages

ACKSYS Communications & Systems RailTrack series Rugged 802.11ac WiFi access point & backbone repeater for trackside network • Triple radio 802.11a/b/g/n/ac (MIMO 3T3R), up to 3 x 1.3 Gbps (radio bit rate), up to 29 dBm output power • MESH, WMM QoS, multiple SSID and centralized RADIUS security supported • WaveManager centralized management software • Auto-sensing dual Gigabit 10/100/1000 Base TX auto MDI/MDIX network interface • 2 SFP slots: 1000 base X fiber optic or 10/100/1000 copper • 100 VAC to 240 VAC • Rugged aluminum enclosure, IP66 seal rating C-KEY READY Top «C-KEY» for quick configuration, save & restore Introduction RailTrack is a ruggedized WiFi access point specially designed for railway and certified for trackside and tunnel infrastructures. It can be connected to the ground network through either Gbps fiber optic or copper connections. Thanks to an oversized CPU architecture (Quad-Core 64-bit) and three independent 802.11ac high-speed radio cards (3 streams) delivering more than 900 Mbps (UDP) each, RailTrack access point allows the construction of high performance architectures such as «wireless backbone» to overcome Ethernet cables along tracksides and tunnels : 2 radios can be used to build the wireless infrastructure on the trackside while the 3rd radio is used as local AP to provide communication between trackside and onboard clients (train). Featuring an IP66 housing and rugged M12 connectors, RailTrack is ideal for wall mounting in a tunnel or mast mounting outdoor. Its all-in-one compact footprint integrates 3 radios, a 4-port Ethernet switch (2 x 10/100/1000 on M12 connectors & 2 x Gigabit optic fiber on SFP slots) with optional Ethernet bypass (daisy chain topologies) and an AC power supply. A removable key (C-KEY) allows the device configuration backup. It can thus be instantaneously restored on site in less than 2 minutes in case of maintenance or replacement of a RailTrack. RailTrack (trackside AP unit) combined to RailBox (on-board WiFi unit) is the comprehensive connected architecture for «train-to-trackside communication in motion» by ACKSYS. This ACKSYS solution allows reliable and very high-speed broadband train-to-trackside communications, particularly suited to broad band radio system (BBRS) for real-time video surveillance, internet on board for passengers as well as CBTC applications. ACKSYS_RailTrack_US_Rev A3_26/03/19 Z.A. Val Joyeux - 10, rue des Entrepreneurs - 78450 Villepreux (FRANCE) - T : +33 (0) 1 30 56 46 46 - F : +33 (0) 1 30 56 12 95 www.acksys.fr

ACKSYS Communications & Systems Technical characteristics overview Ethernet nterface › 2-port Gigabit Ethernet 10/100/1000 auto-sensing, waterproof 8-point M12 X-coded connectors (CAT-6A), auto MDI/ MDIX cross-over, optional Ethernet bypass that redirects the network traffic in case of device or power supply failure (for daisy chain topologies), 1-port PoE+ PSE optional (IEEE 802.3at Type 2 Class 4) › 2 SFP slots IP67 OSIS by Radiall™ : 1000 base X fiber optic or 10/100/1000 copper WiFi interface 3 radios IEEE 802.11a/b/g/n or IEEE 802.11a/b/g/n/ac, MIMO 3T3R, 2.4 / 5 GHz, ANI (Adaptive...