*mydirectindustry

SOIL-XLS

Product catalog summary

Power Unit: The drill rig is powered by a 97 H.P. diesel engine with a 12-volt electric start, designed to operate on a 45-degree slope. Alternative power options are available upon request.

Feed Mechanism: Features a double-acting chain drive mechanism connected to a hydraulic cylinder with a 72-inch stroke, providing 11,000 pounds of upward thrust and pull-down. Feed speeds range from 0 to 72 feet per minute.

Drill Drive: Utilizes a pressure/load compensated piston pump and a single fixed volume gear pump.

Drill Head Options:

4-Speed Drill Head: Offers RPM and torque settings ranging from 0-88 RPM at 5,000 ft./lbs. to 0-584 RPM at 754 ft./lbs.
8-Speed Drill Head: Provides RPM and torque settings from 0-20 RPM at 3,028 ft./lbs. to 0-800 RPM at 458 ft./lbs.

A two-speed hydraulic motor option is available for up to 1,000 RPM in high range.

Mast: Constructed from welded rectangular structural steel tubes, the mast supports and guides feed components. It includes a hydraulic cylinder for positioning, mast extension for 10 ft. rod pulls, and allows for both angle and vertical drilling.

Slide Head: Allows for 12 inches of drill head movement.

Drill Frame: Made of welded steel, it supports the power unit, mast, control panel, winches, and cathead.

Track Mounting: The drill is mounted on a structural steel frame with high-quality crawler tracks, featuring independent reversible hydraulic motor drive and full function radio remote control.

Hoists:

Cathead Hoist: Hydraulically powered, 10-inch diameter.
Auxiliary Hoist: Available in 2,500 lb. or 4,500 lb. planetary type with 75 ft. of 5/16” cable.
Main Drum Hoist: 8,500 lb. planetary type with 100 ft. of 5/8” cable, includes rapid reverse.

Additional Features: Includes quick disconnect adaptor, 2” swivel for air, mud, or water, hydrostatically driven water pump, wireline hoist, front winch, low clearance sheave block assembly, and optional features for specific needs.

Policy: Acker Drill Co., Inc. reserves the right to change design or materials without notice, emphasizing continual improvement.

Catalog excerpts

□RILL COMPANY All-Hydraulic, High-Torque The SOIL-XLB is specifically designed for fast and economical soil investiga- tion/ ground waiter monitoring or core drilling with multiple mast positions for easy access in difficult terrain. 8 Speed FWDSREV to 1,000 RPMs □RILL COMPANY Automatic Chuck/Automatic Hammer Hydraulically Operated Engine Laveler Lateral Slide Head Mast incorporates 5 ft. [1.52 m] Dump Feature Radio Remute Control for Tramming E-Mail: [email protected] Website: www.ackerdrill.com

Open the catalog to page 1

SOIL-XLS STANDARD FEATURES: A. Power Unit - 97 H.P. diesel engine with 12-volt electric start, hydraulically adjustable for constant operation on a 45 degree slope. Other power options available on request. Feed Mechanism - The main feed consists of double acting chain drive mechanism connected to a hydraulic cylinder with 72” stroke and capable of 11,000 pounds upward thrust and 11,000 pounds pull down. Feed speeds are 0-72 FPM up and down. Drill Drive - Taken from prime mover through a pressure/load compensated piston pump and single xed volume gear pump. (4) Speed Drill Head - 3-5/8” Open...

Open the catalog to page 2

All Acker Drill Company catalogs and technical brochures

Archived catalogs

acker RENEGADE
2 Pages