• Drilling Capacity: Capable of coring up to 900 ft. (275 m) using 'N' Wireline.
• Transportability: Designed as a helicopter 'Fly-In' rig with a maximum component weight of 1,900 lbs. (862 kg).
• Construction: Power Pack Skid made of aluminum with a 6 ft. (1.83 m) stroke and a spindle bore of 3-5/8” (9.22 cm).
• Speed and Angle: Features 4 speeds forward and reverse, with a vertical angle capability up to 45 degrees.
• Hoist Capacity: Wire Drum Hoist with a 6,000 lb. (2,721 kg) main hoist capacity.

• Power Unit: Hatz model 4L42C, a 4-cylinder air-cooled diesel engine with 54 HP at 2,000 RPM.
• Drill Head: 3-5/8” spindle bore with 4 speeds ranging from 0-1,200 RPM, featuring a hinged mount with hydraulic assist.
• Feed System: 6 ft. stroke with 12,400 lb. thrust and 9,300 lb. pull, offering feed speeds from 0-56 FPM and fast up to 166 FPM.
• Main Hoist: 6,000 lb. planetary type, hydraulically operated with a fail-safe brake and 75 ft. of 3/8” cable.
• Mounting: Structural steel drag skid base.
• Derrick: Removable tubular steel construction for 15 ft. pulls, capable of vertical or angle drilling.

• Spindle tachometer, quick-disconnect adapters, hand chuck or universal joint with speed options of 0-600 or 0-1,600 RPM.
• Cargo type cathead hoist and a new design 4” automatic chuck with 5 jaw capacity to NW casing.
• Hydraulically driven wireline hoist with brake, including 1,500 ft. of 3/16” wireline.

• Power Pack: 1 lift at 1,915 lbs. (868 kg) or 2 lifts at 1,300 lbs. (590 kg) and 615 lbs. (279 kg).
• Drill Mast Assembly: 1 lift at 1,800 lbs. (816 kg), with dimensions of 10 ft. (3.1 m) in length, 4 ft. 4 in. (1.3 m) in width, and height ranging from 3 ft. 9 in. (1.14 m) to 18 ft. 8 in. (2.6 m) with extension.
• Drill Skid Frame: 1 lift at 1,100 lbs. (499 kg), including control panel and a 24-gallon fuel tank weighing 250 lbs. (113.4 kg) when full.

Note: Weights are approximate and dry measured, with a variance of +/- 10%. Depth ratings depend on in-hole conditions and may vary.