*mydirectindustry

AD-II

Product catalog summary

Overview: This document provides detailed specifications and features of the Acker AD-II Auger/Soils/Core Drill, highlighting its over 40 years of service. It includes information on the power unit, feed mechanism, drill head, mast, and other components.

Specifications:

Power Unit: Equipped with a 97 H.P. diesel engine and 12-volt electric start. Other power options are available upon request.
Feed Mechanism: Features a twin cylinder with a 72” stroke, capable of 21,000 pounds thrust and 28,000 pounds pull.
Drill Head: Includes a 2-15/16” open spindle, accepting all rod and up to “N” wireline, with eight speeds forward and two in reverse. Torque is 7,000 lbs. ft.
Mast: Made of structural steel tubing, allowing optional raising of the feed frame without raising the mast.
Drill Frame: All welded steel construction supporting various components.
Main Drum: 10,000 lb. planetary type.
Controls: Grouped in a convenient panel at the left rear of the machine.
Mounting: The drill is mounted on a structural steel frame with optional slide bases.

Standard Features:

Cathead Hoist
Quick Disconnect Adaptor
2” Swivel for air, mud, or water
Ackermatic Hydraulic Chuck Assembly
Water Pumps
Auxiliary and Wireline Hoists
Automatic Hammer
Hydraulic Leveling Jacks
Platform with storage accommodations
Rod Clamp Assembly
Breakout Wrench
Water Tank with 250-gallon capacity

Optional Features: A complete line of optional accessories is available, and the company reserves the right to change design or materials without notice.

Contact Information: Acker Drill Co., Inc., P.O. Box 830, Scranton, PA 18501. Toll-Free: 800.752.2537, Fax: 570.586.2659, Email: [email protected], Website: www.ackerdrill.com

Catalog excerpts

DRILL COMPANY Bulletin 41 Featuring the Time-Tested S. Proven Auger/Soils/Core □rill ■ ID,ODD lb. [4,535 kg] Hoist ■ Automatic Chuck/Automatic Hammer □RILL COMPANY P.O. Box 830, Scranton, PA 18501 USA Toll Free: 800.752.2537 Fax: 570.586.2659 E-Mail: [email protected] Website: www.ackerdrill.com

Open the catalog to page 1

AD-II STANDARD FEATURES: A. Power Unit - 97 H.P. diesel engine with 12-volt electric start. Other power options available on request. Feed Mechanism - The main feed consists of twin cylinder with 72” stroke and capable of 21,000 pounds thrust and 28,000 pounds pull. Drill Head - 2-15/16”” open spindle, accepts all rod and up to “N” wireline. Eight (8) speeds in forward and two (2) in reverse. Mechanical drive bevel gears torque 7,000 lbs. ft. Lo Range (Spindle Speeds @ 1,800 RPM): 1st gear (0-63 RPM) 2nd gear (0-130 RPM) 3rd gear (0-238 RPM) 4th gear (0-403 RPM) Lo Range (Spindle Speeds @ 2,800...

Open the catalog to page 2

All Acker Drill Company catalogs and technical brochures

Archived catalogs

acker RENEGADE
2 Pages