acker MARK III HILLBILLY Rugged, Diamond Core Drill

Product catalog summary

Power Unit: The drill is powered by a 44 H.P. air-cooled diesel engine with a 12-volt electric start. Optional power units include air, electric, and gasoline.

Drill Head: The BX-7 hydraulic drill head features a 2-15/16” spindle I.D. with a 24” travel and a four-jaw hand chuck. An optional 30” travel is available. Drill head speeds range from 201 RPM in 1st gear to 1,286 RPM in 4th gear, with a reverse speed of 164 RPM.

Transmission: The drill uses a four-speed automotive sliding gear type transmission with one reverse speed.

Main Hoist: A planetary type wire drum hoist with a 90 ft. 1/2” hoist cable and safety hook, capable of lifting 10,000 lbs.

Mounting: The drill is mounted on a structural steel drag skid base with 16” hydraulic retraction. Trailer or truck mounting options are available.

Derrick: Features a twin pole vertical for 10 ft. rod pulls.

Optional Features: Includes the NX4-S hydraulic drill head with a 3-5/8” spindle I.D., cargo type cathead, Ackermatic hydraulic chuck assembly, Moyno and Triplex type water pumps, and a hydraulic motor-driven wireline hoist with an internal brake and level wind feature.

Weights and Dimensions: The standard build has a length of 100”, width of 40”, height of 64”, net weight of 3,220 lbs., gross weight crated of 3,890 lbs., and a cube of 150 ft. Weights are approximate and dry measured with a variance of +/- 10%.

Policy: Acker Drill Co., Inc. reserves the right to change design or materials without notice. A complete line of optional accessories is available.

Catalog excerpts

acker MARK III HILLBILLY Rugged, Diamond Core Drill-1

□RILL COMPANY acker MARK III HILLBILLY Rugged, Diamond Core Drill The MARK III HILLBILLY is designed for soil sampling, mineral exploration and similar operations requiring reliable subsurface information. 4 Speed FWDto 1,200 RPMs/l Speed REV Automatic Chock SCO Degree Angle Capability Slide Base E-Mail: salesCaJackerdrill.com Website: www.ackerdrill.com

Open the catalog to page 1

acker MARK III HILLBILLY Rugged, Diamond Core Drill-2

MARK III HILLBILLY STANDARD FEATURES: A. Power Unit - 44 H.P. air-cooled diesel engine with 12-volt electric start. Air, electric and gasoline powered units optional. B. Drill Head - BX-7 hydraulic drill head, 2-15/16” spindle I.D. 24” travel includes (4) jaw hand chuck. “Optional” 30” travel available. Drill Head Speeds: 1st gear (201 RPM) 3rd gear (761 RPM) C. Transmission - Four (4) speed automotive sliding gear type transmission with one (1) speed in reverse. D. Main Hoist - Planetary type wire drum hoist with 90 ft. of 1/2” hoist cable and safety hook. Capacity 10,000 lbs. E. Mounting -...

Open the catalog to page 2

All Acker Drill Company catalogs and technical brochures

Archived catalogs

acker RENEGADE
2 Pages