acker AD-II Auger/Soils/Core Dril

Product catalog summary

Overview: This document provides detailed specifications and features of the Acker AD-II Auger/Soils/Core Drill, highlighting its over 40 years of service. It includes information on the power unit, feed mechanism, drill head, mast, and other components.

Specifications:

Power Unit: Equipped with a 97 H.P. diesel engine and 12-volt electric start. Other power options are available upon request.
Feed Mechanism: Features a twin cylinder with a 72” stroke, capable of 21,000 pounds thrust and 28,000 pounds pull.
Drill Head: Includes a 2-15/16” open spindle, accepting all rod types up to “N” wireline, with eight forward speeds and two reverse speeds. Torque is rated at 7,000 lbs. ft.
Mast: Constructed from structural steel tubing, allowing for optional raising of the feed frame without raising the mast.
Drill Frame: All welded steel construction supporting various components including the power unit and control panel.
Main Drum: 10,000 lb. planetary type.
Controls: Grouped in a convenient panel located at the left rear of the machine.
Mounting: The drill can be mounted on various bases including truck, track, trailer, skid, or ATV.

Standard Features:

Cathead Hoist
Quick Disconnect Adaptor
2” Swivel for air, mud, or water
Ackermatic Hydraulic Chuck Assembly
Water Pumps
Auxiliary Winch
Wireline Hoist
Automatic Hammer
Hydraulic Leveling Jacks
Platform with safety plate decking
Rod Clamp Assembly
Breakout Wrench
Water Tank with 250-gallon capacity

Optional Features: A complete line of optional accessories is available, and the company reserves the right to change design or materials without notice.

Contact Information: For more details, contact Acker Drill Co., Inc. at their Scranton, PA office.

Catalog excerpts

□RILL COMPANY Featuring the Time-Tested & Proven Automatic Chuck/Automatic Hammer Duel Action Slide Base □RILL COMPANY E-Mail: [email protected] Website: www.ackerdrill.com

Open the catalog to page 1

AD-II STANDARD FEATURES: A. Power Unit - 97 H.P. diesel engine with 12-volt electric start. Other power options available on request. Feed Mechanism - The main feed consists of twin cylinder with 72” stroke and capable of 21,000 pounds thrust and 28,000 pounds pull. Drill Head - 2-15/16”” open spindle, accepts all rod and up to “N” wireline. Eight (8) speeds in forward and two (2) in reverse. Mechanical drive bevel gears torque 7,000 lbs. ft. Lo Range (Spindle Speeds @ 1,800 RPM): 1st gear (0-63 RPM) 2nd gear (0-130 RPM) 3rd gear (0-238 RPM) 4th gear (0-403 RPM) Lo Range (Spindle Speeds @ 2,800...

Open the catalog to page 2

All Acker Drill Company catalogs and technical brochures

Archived catalogs

acker RENEGADE
2 Pages