• Power Unit: 28 H.P. diesel engine with a 12-volt electric start. Other power options are available upon request.
• Drill Head: AW6-S hydraulic drill head with a 24” stroke, AW rod hand chuck, spiral bevel gears, and a manual spindle lockout. The drill head can swivel 360 degrees.
• Thrust and Pull: Thrust capacity is 9,424 lbs, and pull capacity is 12,566 lbs. The spindle I.D. is 1-27/32”.
• Drill Head Speeds: Four gears with speeds of 204 RPM, 422 RPM, 772 RPM, and 1,302 RPM. Optional speeds are available on request.
• Transmission: Four-speed automotive sliding gear type with one reverse speed, featuring a flange-mounted drive for the hydraulic pump.
• Main Hoist: Planetary wire drum hoist with 75 ft. of 5/16” cable, featuring a brake and clutch wrap-around bands with a capacity of 5,000 lbs.
• Cathead: Cargo type hoist with manual lockout, capacity of 2,000 lbs.
• Mounting: Structural steel drag skid base with 16” hydraulic retraction.
• Derrick: Designed for hoisting 10 ft. sections of rods/casing.

• Different drill heads with varying spindle bores and travel lengths.
• Hydraulic chuck assembly compatible with all drill heads.
• Hydraulically driven water pumps (Moyno or Triplex type).
• Hydraulic wireline winch with 750 ft. of 3/16” cable.
• Angle hole type derrick for up to 25 degrees from vertical pulls.
• Two-wheel trailer with ball or pintle hitch, electric brakes, and jacks.

• Length: 72 inches (1,829 mm)
• Width: 40 inches (1,015 mm)
• Height: 63 inches (1,600 mm)
• Net Weight: 2,250 lbs. (1,023 kg)
• Gross Weight Crated: 2,500 lbs. (1,136 kg)
• Standard Derrick Weight: 280 lbs. (127 kg)

Note: Weights are approximate and dry measured, with a variance of +/- 10%.