STANDARD MICA BAND HEATERS AVAILABLE FROM STOCK
1Pages

STANDARD MICA BAND HEATERS AVAILABLE FROM STOCK • Max. watt density over the surface of the heater : 5 W/cm² Max. operating temperature over the surface of the heater: 340°C, depending on working conditions. Dimensions of a standard mica band heater : 16 mm 7 mm Available in 2 versions: - wire connection: wiring with a large bending radius, nevertheless quite fragile. - metal braid connection, embossed exit: appreciated for its low profile. Height Nickel core, fiberglass insulated + earth wire. For the model with embossement connection, the wires are To each diameter of heater corresponds a clamping capacity. For protected with a galvanized steel braid. instance, a heater with a diameter of 30 mm can be fitted on a nozzle with a diameter of 30 mm or 31 mm. Voltage: 230 V single phase. In charts below, the diameter of a band heater is written in green and Electric insulation with mica plates. below it, its clamping capacity, is written in black between brackets. Square angle flange, screw CHC M4 and square nuts. Products are in accordance with EN 60335-1 Wattage tolerance : +5% -10% Leakage current < 0.75 mA/kW WIRE CONNECTION • Special manufactures : - Specific sizes of heaters, not kept in stock, see p 5. - Accessories and options, see p 12. - How to define a special band heater, see p 18. Heaters available from stock : Diameter : 25 to 60 mm Height : 20 to 80 mm Wattage : 85 to 515 W Diameter Height Watt. . Braid ∅ (mm) H (mm) P (W) L (mm) Part number Diameter Height Watt. . Braid ∅ (mm) H (mm) P (W) L (mm) BRAID CONNECTION, WITH EMBOSSEMENT Diameter Height Watt. . Braid ∅ (mm) H (mm) P (W) L (mm) Part number Heaters available from stock: Diameter : 25 to 60 mm Height : 20 to 80 mm Wattage : 85 to 515 W Diameter Height Watt. . Braid ∅ (mm) H (mm) P (W) L (mm) Diameter Height Watt. Braid ∅ (mm) H (mm) P (W) L (mm) Part number Outside sheath in aluminized steel. Connection with ceramic beads to avoid eventual pulling of the wires,12 mm ∅, 4 mm height. Wiring centred over the height of the heater. Outside sheath in brass. Embossement connection, wire + braid, low profile, 12 mm ∅, 5 mm height. Exit located at 16 mm from the edge. Part number Diameter Height Watt. . Braid ∅ (mm) H (mm) P (W) L (mm) Part number Part number Dimensions of the above heaters with wire connection, are also available with braid and embossement connection. Except heaters with heights smaller than 32 mm. Our products specifications are subject to change without notice. We reserve the right to mo