![acim jouanin - logo](https://img.directindustry.com/images_di/logo-p/L63815.gif)
Catalog excerpts
![Encapsulated sealed nozzle heaters - 1](https://img.directindustry.com/pdf/repository_di/63815/encapsulated-sealed-nozzle-heaters-434317_1m.jpg)
STANDARD ENCAPSULATED SEALED NOZZLE HEATERS • Max. watt density over the surface of the heater: 6.5 W/cm² Max. operating temperature over the surface of the heater: 340°C, depending on working conditions. Diameter : 25 to 100 mm Height : 20 to 80 mm Wattage : 65 to 970 W, 230 V single phase For other dimensions, not kept in stock, see p 5 Sealed band heater in brass, with folded Band heater connection, waterproof technology. Electric insulation by mica plate. Connection : nickel core, fiberglass insulated + earth wire; protected by a galvanized steel braid. Connection cap : axial 30°, centred on the height of the band heater, up to 38 mm height. Over 38 mm height, it is placed at 20 mm from the edge. (See sketch). (Except L2570C26G10*) Dimensions of a standard insulated mica nozzle heater : Cap fixed at 80° fromthe clamping 30° 13 mm 20 Square angle flange clamping, screw BTR M4, self-locking square nuts. Our products are in accordance with EN 60335-1 Wattage tolerance: +5% -10% Leakage current < 0.75 mA/kW Special manufactures : - Sealed stainless steel nozzle heater (see picture on next page). - Max. watt density : 5 W/cm². - Specific sealed nozzle heaters not kept in stock, see p 5. - Accessories and options, see p 12. - How to define a special band heater: see p 18. Diameter Height Power Braid ∅ (mm) H (mm) P (W) L (mm) Part number To each diameter of band heater corresponds a clamping capacity. For instance, a band heater with a diameter of 30 mm can be fitted on a nozzle of 30 mm to 31 mm. In charts below, the diameter of a band heater is written in green and below it, its clamping capacity is written in black between brackets. Diameter Height Power Braid ∅ (mm) H (mm) P (W) L (mm) Diameter Height Watt. Braid Part number ∅ (mm (mm) W (W) L (mm) * Cap off center at 0 mm from the edge of the band heater. One end of the clamping tab is bevel-edged at 45° Our products specifications are subject to change without notice. We reserve the right to modify them according to the technical evolution
Open the catalog to page 1![Encapsulated sealed nozzle heaters - 2](https://img.directindustry.com/pdf/repository_di/63815/encapsulated-sealed-nozzle-heaters-434317_2m.jpg)
STANDARD ENCAPSULATED SEALED NOZZLE HEATERS Diameter Height Watt.. Braid ∅ (mm) H (mm) W (W) L (mm) Part number Diameter Height Watt.. Braid ∅ (mm) H (mm) W (W) L (mm) Stainless steel sealed nozzle heater (Special manufacture) Part number Part number Diameter Height Watt.. Braid ∅ (mm) H (mm) W (W) L (mm) Sealed nozzle heater, in brass. Our products specifications are subject to change without notice. We reserve the right to modify them according to the technical evolution
Open the catalog to page 2All Acim jouanin catalogs and technical brochures
-
SEALED MICA STRIP HEATERS
1 Pages
-
OPTIONS FOR BAND HEATERS
1 Pages
-
Band heaters
20 Pages
-
Cartridge heaters
20 Pages
-
Infrared emitters
7 Pages
-
Energy saving band heaters
1 Pages
-
Ventilated band heaters
1 Pages
-
Ceramic band heaters
1 Pages