CONNECTION TYPES FOR STANDARD CARTRIDGE HEATERS
3Pages

CONNECTION TYPES FOR STANDARD CARTRIDGE HEATERS • Stock standard cartridge heaters can be fitted with the following connection types and are available within 72 hours. The sealing connection of the cartridges listed below are made of a thermal cement (except for CCT.4). For a silicone sealing (Tmax : 260°C), protecting against moisture, please write down the kind of output chosen and specify CCT.15 (T°C max 180°C except if heating area is in front of the connection : 250°C). Sealing is not suitable for connection type CCT.1 and CCT.2. Contact us for connection - sealing compatibility STRAIGHT CONNECTIONS o Flexible wires, nickel conductor, fiberglass insulated, designed to support a maximum operating temperature of 350°C. (except for CCT.4) Caption : L = total length of cartridge Wires - CCT.0 (fitted on a standard cartridge heater) Ceramic beads insulations - CCT.1 12.5 ≤ ∅cartridge ≤ 20 mm : B Type Ceramic beads protect the leads and are suitable for high working temperatures in excess of 350°. Galvanized steel braid. They are suitable for a good mechanical protection of lead wires. Flexible metal conduit - CCT.2 (GMF) Connection with a multiconductor cable - CCT.4 12.5 ≤ ∅cartridge ≤ 20 mm Copper cable silicone insulated, 2 wires + earth, T° max. : 180°C. Brazed watertight assembly. Silicone seal. 19.05 ≤ ∅cartridge ≤ 20 mm : Sample D Steel galvanized flexible metal conduit, crimped or silver brazed, depending on the diameter of the cartridge heater. Without ceramic head rigid connection - CCT.29 L Wiring which combines both high intensity and low profile. Lead wires connected to the rigid connection rod and insulated with a high temperature protection sleeve. 12.5 ≤ ∅cartridge ≤ 20 mm Recommended when both the cartridge heater and the wiring are in motion. These cables should be very flexible. Wirings length varies according to the diameter of the cartridge heater. In case of space restrictions, please consult us. Possibility of combining a thermocouple or an earth wire, fitted with some of the above connections. Please contact us. Our products specifications are subject to change without notice. We reserve

CONNECTION TYPES FOR STANDARD CARTRIDGE HEATERS • Stock standard cartridge heaters can be fitted with the following connection types and are available within 72 hours. The sealing connection of the cartridges listed below are made of a thermal cement (except for CCT.4). For a silicone sealing (Tmax : 260°C), protecting against moisture, please write down the kind of output chosen and specify CCT.15 (T°C max 180°C except if heating area is in front of the connection : 250°C). Sealing is not suitable for connection type CCT.10. Contact us for connection - sealing compatibility 90° BENT...

CONNECTION TYPES FOR SPECIAL CARTRIDGE HEATERS Stock standard cartridge heaters can be fitted with the following connection types and are available within 72 hours. • The sealing connection of the cartridges listed below are made of a thermal cement (except for CCT.4). For a silicone sealing (Tmax : 260°C), protecting against moisture, please write down the kind of output chosen and specify CCT.15 (T°C max 180°C except if heating area is in front of the connection : 250°C). Sealing is not suitable for connection type CCT.10A. Contact us for connection - sealing compatibility STRAIGHT...