Round sight glass plates DIN 7080for circular sight glass fittings DIN USAGE MAXOS® safety sight glasses are used wherever processes in container or flow sight glasses need to be reliably monitored under thermal and chemical stress.They enable safe visual inspection and contribute significantly to process control and safety. The high durability of these sight glasses is based on a special borosilicate glass, which is characterized by excellent chemical resistance, extraordinary purity, and high homogeneity. Thanks to the characteristic low thermal expansion of borosilicate, the glass can be thermally pre-stressed (tempered), giving it particularly high temperature cycling resistance. This combination of material properties and thermal treatment makes MAXOS® sight glasses a safe and durable solution for demanding industrial applications. Through production and quality inspections in the process flow, the property values of the glasses and the tight dimensional tolerances are guaranteed. With these excellent safety features, MAXOS® safety sight glasses can be used in extreme conditions. Operating conditions according to DIN 7080: 1) Only in combination with MAXOS® safety sight glasses Technical information CHEMICAL RESISTANCE Chemical resistance FRACTURE BEHAVIOR In the adjacent images, the fracture behavior of thermally pre-stressed borosilicate glass can be seen. It shatters without leaving sharp-edged break pieces. The glass break resembles a safety windshield in a car or safety glass. 17092025 - Subject to technical changes and errors!

Round sight glass plates DIN 7080for circular sight glass fittings DIN DEDUCTION RATES Material removal of MAXOS glass plates according to DIN 7080 in aqueous phase at various temperatures as a function of the pH value. Abrasion [mm/month] DIMENSIONAL TOLERANCES The dimensional tolerances are based on DIN 7080 for sight glass plates made of borosilicate glass. In the adjacent table, the expected dimensional tolerances can be taken. PERMISSIBLE MATERIAL DEFECTS Round bubbles enclosed in glass may have a maximum diameter of 2 mm. Oval bubbles may not exceed the value (length + width)/2 = 2 mm....

Round sight glass plates DIN 7080 for circular sight glass fittings DIN7080 Standard dimensions according to DIN 7080 17092025 - Subject to technical changes and errors!

Round sight glass plates DIN 7080 for circular sight glass fittings 17092025 - Subject to technical changes and errors! Powered by TCPDF (www.tcpdf.org)