Shoulder Milling Cu�er ——AO Series

AO Series Shoulder Milling Cutter AO series shoulder milling cutter with two cutting edge was launched by ACHTECK. Spiral side cutting edge design can achieve lower cutting force and smooth cut. Pressing and ground precision inserts are suitable for all kinds of cutting conditions. Inserts with own designed substrate and coating can meet differernt requirements on machining various materials, significant advantage in S and M material group. Approching angle: accurate 90°,to achieve precise square machining. Spiral side cutting edge design, offers lower cutting force, smooth cut and better universal....

Milling RCHTECK Shoulder Milling Cutter AOIO Cutter specification Diameter range Corner radius Corner radius APE90-AO12 Porcupine cutter specification Diameter range Corner radius Diameter range

Milling RCHTCGK Shoulder Milling Cutter * Geometries Insert Cutting edge Application range • For medium cutting conditions • 1st choice for general machining • For good cutting conditions, finishing • Low cutting force, can be used for low-power machines • Sharp geometry • Used for aluminum machining * Grades Grade

Milling RCHTECK Product code Note: ** with internal coolant n without internal coolant

Milling RCHTECK Shoulder Milling Cutter Product code

Milling RCHTECK Shoulder Milling Cutter Product code Note: i*1 with internal coolant ?* without internal coolant

Milling RCHTECK Shoulder Milling Cutter Product code Note: f*1 with internal coolant n without internal coolant Remark: Regrind the tip of the cutter when inserts' radius over R2.4 Regrind the tip of the cutter to R1.5 when the radius of the mounted inserts is R2.4 Regrind the tip of the cutter to R2.0 when the radius of the mounted inserts is R3.1 Regrind the tip of the cutter to R3.0 when the radius of the mounted inserts is R4.0

Milling RCHTCCK Shoulder Milling Cutter Product code Note:Clamping bolt included in packaging Note: f*1 with internal coolant without internal coolant

Milling RCHTECK Shoulder Milling Cutter Three parts of the porcupine milling cutter Clamping bolt Front part of the cutter Base of the cutter Front part of the cutter Note:Buying front and basic part of porcupine milling cutter are without clamping bolt and wrench Note: ** with internal coolant n without internal coolant

Shoulder Milling Cutter Product code Note: i*1 with internal coolant without internal coolant

Milling RCHTECK Shoulder Milling Cutter

Milling RCHTECK Shoulder Milling Cutter

Milling RCHTECK Shoulder Milling Cutter Product Series

Milling RCHTECK Product Series * ASM90-AO Series technical information APE90-AO12 APE90/APE90S-AO12 notes for porcupine milling cutter installation: 1.APE90/APE90S-AO12 front part is compatible with All AO12 inserts. 2.APE90/APE90S-AO12 basic part is compatible with the inserts with radius under 1.2.