- Catalogs
- Achteck Tool
- Cermet Inserts with coating
Cermet Inserts with coating
Cermet Inserts with coating
The document introduces the AT210A coated cermet inserts, designed for high-quality and efficient steel turning. These inserts feature a gradient-based substrate design and a nano-alternative composite coating, providing a balance between wear resistance and toughness due to their ultra-fine and hard grain composition.
- High efficiency and quality for continuous steel turning.
- Excellent oxidation resistance for dry cutting conditions, offering a good performance and price ratio.
- Universal grade suitable for continuous and light interrupted cutting.
- High coating adhesion ensures stable tool life and smooth machining surfaces.
Graphs in the document demonstrate the superior wear and chipping resistance of AT210A compared to competitors under specified cutting conditions.
- Available in negative and positive inserts for various turning applications, including finish, profile, semi-finish, and medium turning.
- Each insert type is optimized for specific cutting conditions, enhancing chip removal, cutting forces, and surface quality.
Case studies highlight the AT210A's effectiveness in reducing costs and increasing tool life compared to competitors, with examples in external and internal finish turning applications.
The document includes a detailed stock list of negative inserts, with product codes, grades, sizes, and recommended parameters, indicating stock availability.
This section provides a detailed list of new cutting tool inserts introduced by Achteck Tool, categorized into negative and positive types, with specific product codes, sizes, and recommended parameters.
- Product Codes: Unique codes identify each insert, such as WNMG 080404-M3T, CCMT 060202E-PA1.
- Sizes: Inserts are available in various sizes, measured in millimeters.
- Recommended Parameters: Specific recommended parameters for feed rate and depth of cut are provided.
- Inserts are marked as stocked or non-stocked, indicating purchase availability.
- The document includes a comprehensive stock list for both negative and positive inserts, detailing product codes, sizes, and recommended parameters.
- New product introductions are highlighted, focusing on parameters that optimize performance.
This document serves as a technical guide for selecting appropriate cutting tool inserts based on specific machining requirements, providing essential information on product availability and recommended usage parameters for optimal performance.
Catalog excerpts
RCHTECK NEW PRODUCT INTRODUCTION Coated Cermet Inserts for Steel Turning
Open the catalog to page 1
High efficiency, high quality, suitable for continuous steel turning. Good performace & price ratio, good oxidation resistance for continuous and dry cutting conditions. Universal grade for steel turning, continuous and light interrupted cutting. The substrate uses the new gradient-based design, combined with nano-alternative composite coating to achieve high-quality and high-efficient cutting for steel. Nano-alternative layer design High coating adhesion and good oxidation resistance build a stable tool life, also can get smooth machining surface. Gradient-based design Good balance between wear...
Open the catalog to page 2
Cutting time（min） Competitor A Cutting Condition Insert: CNMG 120408** Cutting Speed: Vc=250m/min Feed: f=0.2mm/rev Cutting Depth: ap=1.0mm Chipping Comparison Material: C45 Coolant: Wet Cutting Condition Insert: CNMG 120408** Cutting Speed: Vc=150m/min Feed: f=0.2mm/rev Cutting Depth: ap=1.0mm impacting time
Open the catalog to page 3
RCHTECK NEW PRODUCT INTRODUCTION April 2024
Open the catalog to page 4
NEW PRODUCT INTRODUCTIONApril 2024 * Negative Insert LO CO V- CO (N (N v- CO CN CN (lulu) de • (lulu) de (lulu) Positive Insert 4/18 Cross Section Used for steel finish steel, sharp cut-ting edge, good surface finish, low cutting force, good performance. Used for universal finish turning, high stability. Low cutting forces, good performan -ce in chip removal. Sharp cutting edge, good chip removal and low cutting forces. Universal light turning, high surface quality.
Open the catalog to page 5
NEW PRODUCT INTRODUCTION April 2024
Open the catalog to page 6
HCHTECK NEW PRODUCT INTRODUCTION April 2024 • Success Stories Insert external finish turning external finish turning Cutting Speed Cutting Speed Cutting Depth Cutting Depth Cost per part CNY/PC Workpiece quantity/ Cutting edge Under thesame condition, Cost per part is decreased by 25%. End face finish turning Cutting Speed Cutting Depth Under the same condition, tool life for each cutting edge is increased by 23%.
Open the catalog to page 7
NEW PRODUCT INTRODUCTION April 2024 Remark: • Stocked O Non-stocked (Please check the stock)
Open the catalog to page 8
Stock List---Negative Inserts Insert Product Code DNMG 150404E-PB3 DNMG 150408E-PB3 DNMG 150412E-PB3 DNMG 150604E-PB3 DNMG 150608E-PB3 DNMG 150612E-PB3 DNMG 150404R-M1T DNMG 150404L-M1T DNMG 150404E-PC3 DNMG 150408E-PC3 DNMG 150412E-PC3 DNMG 150604E-PC3 DNMG 150608E-PC3 DNMG 150612E-PC3 DNMG 110404E-PD3 DNMG 110408E-PD3 DNMG 150404E-PD3 DNMG 150408E-PD3 DNMG 150404E-PC4 DNMG 150408E-PC4 DNMG 150604E-PC4 DNMG 150608E-PC4 SNMG 120404E-PB1 SNMG 120408E-PB1 SNMG 120404E-PC3 SNMG 120408E-PC3 SNMG 120412E-PC3 SNMG 120404E-PD3 SNMG 120408E-PD3 SNMG 120412E-PD3 SNMG 120404-M3T SNMG 120408-M3T Recommended...
Open the catalog to page 9
Stock List---Negative Inserts Insert Product Code Recommended Parameters TNMG 160402E-PA1 TNMG 160404E-PA1 TNMG 160408E-PA1 TNMG 160412E-PA1 TNMG 160404E-PB1 TNMG 160408E-PB1 TNMG 160412E-PB1 TNMG 160404-F1T TNMG 160408-F1T TNMG 160404-F1Y TNMG 160408-F1Y TNMG 160408R-M1T TNMG 160408L-M1T TNMG 160404-F2K TNMG 160408-F2K TNMG 160404E-PB3 TNMG 160408E-PB3 TNMG 160412E-PB3 TNMG 160404R-M2T TNMG 160404L-M2T TNMG 160404E-PC3 TNMG 160408E-PC3 TNMG 160412E-PC3 Remark: ● Stocked ○ Non-stocked (Please
Open the catalog to page 10
NEW PRODUCT INTRODUCTION April 2024 Remark: • Stocked O Non-stocked (Please check the stock)
Open the catalog to page 11
Stock List---Negative Inserts Insert Product Code VNMG 160408E-PC4 VNMG 160412E-PC4 VNMG 160404E-BS VNMG 160408E-BS WNMG 080402E-PA1 WNMG 080404E-PA1 WNMG 080408E-PA1 WNMG 080412E-PA1 WNMG 080404-F1T WNMG 080408-F1T WNMG 080404E-PB1 WNMG 080408E-PB1 WNMG 080412E-PB1 WNMG 080404-F1Y WNMG 080408-F1Y WNMG 080404E-PB3 WNMG 080408E-PB3 WNMG 080412E-PB3 WNMG 080404E-PC3 WNMG 080408E-PC3 WNMG 080412E-PC3 WNMG 080404E-PD3 WNMG 080408E-PD3 WNMG 080412E-PD3 Recommended Parameters Remark: ● Stocked ○ Non-stocked
Open the catalog to page 12
NEW PRODUCT INTRODUCTIONApril 2024* Stock List---Negative Inserts Recommended Parameters Product Code Size(mm) AT210A WNMG 080404E-PC4 WNMG 080408E-PC4 WNMG 080412E-PC4 Remark: • Stocked O Non-stocked (Please check the stock)^ Stock List-Positive Inserts Insert Remark: • Stocked O Non-stocked (Please check the stock) 12/18
Open the catalog to page 13
Stock List---Positive Inserts Insert Product Code Recommended Parameters CCMT 09T308E-PC2 CCMT 120404E-PC2 CCMT 120408E-PC2 CCMT 120412E-PC2 CPMT 090304-PC2 CPMT 090308-PC2 CCMT 060202-F2K CCMT 060204-F2K CCMT 09T302-F2K CCMT 09T304-F2K CCMT 09T308-F2K CCMT 09T304E-KC2 CCMT 09T308E-KC2 CCMT 120404E-KC2 CCMT 120408E-KC2 CCMT 120412E-KC2 Remark: ● Stocked ○ Non-stocked (Please check th
Open the catalog to page 14
NEW PRODUCT INTRODUCTION April 2024 Remark: • Stocked O Non-stocked (Please check the stock)
Open the catalog to page 15
Stock List---Positive Inserts Insert Product Code Recommended Parameters DCMT 11T308E-KC2 SCMT 09T304E-PB1 SCMT 09T308E-PB1 SCMT 09T304E-PC2 SCMT 09T308E-PC2 SCMT 120404E-PC2 SCMT 120408E-PC2 SCMT 09T304-M2T SCMT 09T308-M2T SCMT 09T304E-KC2 SCMT 09T308E-KC2 SCMT 120404E-KC2 SCMT 120408E-KC2 Remark: ● Stocked ○ Non-stocked (Please check the stock)
Open the catalog to page 16
NEW PRODUCT INTRODUCTION April 2024 Remark: • Stocked O Non-stocked (Please check the stock)
Open the catalog to page 17
Stock List---Positive Inserts Insert Product Code Recommended Parameters TCMT 110204-M2T TCMT 110208-M2T TCMT 110302-M2T TCMT 090204E-KC2 TCMT 090208E-KC2 TCMT 110204E-KC2 TCMT 110208E-KC2 TCMT 110302E-KC2 TCMT 16T304E-KC2 TCMT 16T308E-KC2 VBMT 110302E-PA1 VBMT 160404E-PA1 VBMT 160408E-PA1 VBMT 110302E-PB1 VBMT 110304E-PB1 VBMT 110308E-PB1 VBMT 160404E-PB1 VBMT 160408E-PB1 VBMT 110304E-PC2 VBMT 110308E-PC2 VBMT 160404E-PC2 VBMT 160408E-PC2 Remark: ● Stocked ○ Non-stocked (Please
Open the catalog to page 18
NEW PRODUCT INTRODUCTION April 2024 Remark: • Stocked O Non-stocked (Please check the stock)
Open the catalog to page 19All Achteck Tool catalogs and technical brochures
ASW Small Tool Series10 Pages
AP330M grooving7 Pages
AHM15-XD09 12 High Feed Milling10 Pages
ASM90-SO12 Shoulder Milling5 Pages
Chamfering7 Pages
ATM60 Threading Milling inserts11 Pages
AFM45-XN07 09 for Face Milling10 Pages
Turning Toolholder Series42 Pages
AT202 Cermet inserts9 Pages
HNGX 0906ANN-MR615 Pages
CEMENTED CARBIDE RODS22 Pages
- Milling tool
- Solid milling cutter
- End mill
- Solid carbide milling cutter
- Ball nose milling cutter
- Corner radius milling cutter
- Interlocked side milling cutter
- Grooving tool
- Milling head
- Chamfering tool
- Internal grooving tool
- Grooving insert
- Toroidal milling cutter
- Metal grooving insert
- Stainless steel grooving insert