ASM90-SO12 Shoulder Milling

Product catalog summary

Product Introduction
The ASM90-SO12 series by Achteck is a new line of shoulder milling cutters designed for use with steel, cast iron, and stainless steel. These cutters feature a large rake angle design and sharp cutting edges, providing precision 90° milling with reduced cutting forces. The cutters are available in multiple connection types, including cylindrical shank, Weldon shank, and arbor mount, and are equipped with a short wiper for improved surface finish.

Features

Large α angle design for enhanced performance.
Double clearance angle and spiral edge design to minimize cutting forces.
Multiple connection types for versatile application.

Insert and Cutter Specifications
The SOMT 1204.. insert is compatible with the ASM90-SO12 cutter, available in various dimensions and grades. The cutters are designed with internal coolant capabilities and are available in sizes ranging from 32mm to 250mm in diameter.

Success Stories

Turbocharger Housing: Using the ASM90-032-Z03-C32R-SO12-L130-C cutter and SOMT 120408PDER-MM4 AP351M insert, the tool life increased by 20% compared to competitors, with cutting data of Vc=109m/min, ap=6mm, and fz=0.015mm.
Arm Bracket: The ASM90-100-Z07-A32R-SO12-C cutter and SOMT 120408PDER-MM4 AP351M insert achieved a 25% increase in tool life over competitors, with cutting data of Vc=157m/min, ap=5mm, and fz=0.12mm.

Catalog excerpts

Square Shoulder Milling

Open the catalog to page 1

ASM90-SO12 Series Product Introduction ASM90-SO12 Achteck's shoulder milling cutters combined with inserts that feature a self-devel- oped next-generation substrate and coating are suitable for steel, cast iron and stainless steel, providing a complete solution for shoulder milling. Double clearance angle and spiral edge design to reduce cutting forces. Manufactured with a short wiper to obtain a good surface ﬁnish. Multiple connection types: cylindrical shank, weldon shank and arbor mount. 90° Large α angle design Large rake angle design Sharp cutting edges Secondary cutting edge 1.4 mm Good...

Open the catalog to page 2

SOMT 1204.. Insert DimensionInsert codeSOMT 120408PDER-MM4 12.46 4.8 RE BS Cutter code

Open the catalog to page 3

RCHTECK NEW PRODUCT INTRODUCTION June 2024 Cutter code Cutter code Spare parts Cutter diameter Torque 032-250

Open the catalog to page 4

ASM90-SO12 Success Story Workpiece: Turbocharger Housing Material: 1.4826 Insert: SOMT 120408PDER-MM4 AP351M Cutter: ASM90-032-Z03-C32R-SO12-L130-C Machining: Cutting cavity Cutting Data: Vc=109m/min, ap=6mm, fz=0.015mm Coolant: Wet Tool life/pcs Story resource: End user ASM90-SO12 Success Story Workpiece: Arm Bracket Material: High-strength Steel Insert: SOMT 120408PDER-MM4 AP351M Cutter: ASM90-100-Z07-A32R-SO12-C Machining: Face milling Cutting Data: Vc=157m/min, ap=5mm, fz=0.12mm Coolant: Dry Tool life/pcs Competitor ACHTECK Story resource: End user

Open the catalog to page 5

ASM90-SO12 Shoulder Milling

ASM90-SO12 Shoulder Milling

Catalog excerpts

All Achteck Tool catalogs and technical brochures