*mydirectindustry

TFR A

Product catalog summary

Overview: The document provides technical specifications and features of the TFR A stone cutting machine by Achilli s.r.l., designed for precision cutting with a fixed bridge and optional accessories.

Specifications:

Steel Frame: Sandblasted and painted with epoxy-powder finish, hot-dip galvanized upon request.
Motorized Features: Includes motorized head feed with variable speed and motorized cutting depth adjustment.
Worktable: Made of steel rails, equipped with six worktable extensions.
Bridge Tilt: Manual tilt for cutting angles from 90 to 45 degrees.
Optional Features: Water tray with recycling pump, hydraulic pop-up rollers, laser alignment device, and side extension table with or without rollers.

Technical Data:

Useful Cut Length: 3300 mm for both TFR A and TFR A HT models.
Diamond Blade Diameter: Ranges from 250-350 mm for TFR A and 400-450 mm for TFR A HT.
Motor Power: 4 kW (5.5 HP) for TFR A and 3.6 kW (5 HP) for TFR A HT, both 3-phase.
Motor Rotation Speed: 2800 rpm at 50Hz and 3400 rpm at 60Hz for TFR A; 1400 rpm at 50Hz and 1700 rpm at 60Hz for TFR A HT.
Voltage/Frequency: Standard 400V-50Hz or 230V-60Hz.

Device for Parallel Cuts: The machine can be equipped with a device for parallel cuts, using a hand wheel to adjust the side stop parallel to the cutting line, displayed by a digit position indicator.

Additional Information: Achilli s.r.l. reserves the right to modify technical details without notice. The document includes dimensions and additional specifications for different blade sizes and motor configurations.

Catalog excerpts

EVOLUTION IN STONE TECHNOLOGY SAW WITH FIXED BRIDGE segatrice a ponte fisso BRIDGE TILT AT 45 DEGREES HYDRAULIC POP-UP ROLLERS DEVICE FOR PARALLEL CUTS TFR A WITH ACCESSORIES ► Inclinazione ponte a 45° ► Rulliera oleodinamica ► Dispositivo per tagli paralleli ►TFRAconaccessori

Open the catalog to page 1

STEEL FRAME, SANDBLASTED AND PAINTED WITH EPOXY-POWDER FINISH (HOT-DIP GALVANIZED UPON REQUEST). MOTORIZED HEAD FEED WITH VARIABLE SPEED. MOTORIZED CUTTING DEPTH ADJUSTMENT. WORKTABLE MADE OF STEEL RAILS. MANUAL BRIDGE TILT FOR CUTTING FROM 90 TO 45 DEGREES. EQUIPPED WITH No. 6 WORKTABLE EXTENSIONS. WATER TRAY WITH BUILT-IN RECYCLING PUMP (OPTIONAL). HYDRAULIC POP-UP ROLLERS FOR EASY SLAB POSITIONING (OPTIONAL). LASER ALIGNMENT DEVICE (OPTIONAL). SIDE EXTENSION TABLE WITH OR WITHOUT ROLLERS (OPTIONAL). AVAILABLE WITH HAND CRANK (TFR C MODEL). Telaio in acciaio, sabbiato e verniciato con polvere...

Open the catalog to page 2

TFR A

TFR A

Catalog excerpts

All Achilli s.r.l. catalogs and technical brochures