OLYMPIA• Portable sandblaster with recycling system for dustless sand blasting work with no abrasive rebound SODA BLASTING WET BLASTING Olympia COMPLETE Length Width Height Weight SAND BLASTING UNIT Capacity Working pressure Air consumption Hose Length Hose diameter Nozzle diameter VACUUM SYSTEM Engine power 1000 W Power electric single-phase

PRINCIPLE Load the sandblaster and supply it with compressed air. Plug and turn on the electrical suction unit. Insert the blast lance into the brush holder attached to the end of the suction hose. Apply the brush against the surface. Once the projected abrasive touches the surface, it is immediately sucked in and recovered for recycling purposes into the tank chamber located above the sandblaster. Using the remote control (pre-mounted at the end of the blasting hose), the operator can stop and start the blasting operation anytime from his work-station. Ø 3 mm (or 4 mm under 4 bar) nozzles can...