BPSP 50 DUSTLESS SANDBLASTING f ^ • For dust free stripping and engraving works without abrasive rebounds SANDBLASTING SHOTBLASTING • Once the media strikes the surface, it is immediately sucked in and recovered into the cyclonic chamber • No helmet is needed, a visor is enough • 3 or 4 mm nozzles can be used taking into account the suction power • Endless application possibilities: work on metal, aluminium, stainless steel, copper, stone, marble, granite, bronze... • Weld seams, decoration work, stone or wood engraving, mould cleaning, interior sandblasting... Weight Width Height Length BLASTING MACHINE Capacity Working pressure Air consumption Hose length Hose diameter Nozzle diameter VACUUM SYSTEM Engine power 1000 W Power Electric - single-phase

OPERATION PRINCIPLE Load the sandblaster and supply it with compressed air. Plug and turn on the electrical suction unit. Insert the blast lance into the brush holder attached to the end of the suction hose. Apply the brush against the surface. Once the projected abrasive touches the surface, it is immediately sucked in and recovered for recycling purposes into the tank chamber located above the sandblaster. Straight brush S 859 Using the remote control (pre-mounted at the end of the blasting hose), the operator can stop and start the blasting operation anytime from his workstation. Ø 3 mm (or...