*mydirectindustry

Catalogs
ACF France
Air purifior lubricator

Air purifior lubricator

Product catalog summary

Overview: This document provides technical specifications and operational guidelines for air purifiers and purifier-lubricators designed to protect pneumatic tools from oxidation, icing, clogging, and yield losses. These devices are particularly useful in environments with high humidity and low temperatures.

Specifications:

Models: P102, P104, P105, P106, P110, P112, P113, P116
Dimensions and Weight: Vary by model, with widths ranging from 125mm to 770mm, heights from 170mm to 930mm, and weights from 0.55 kg to 26 kg.
Outlet Diameter: Options include 1/2” and 1”.
Max. Tolerated Airflow: Ranges from 2500 l/mn to 12000 l/mn depending on the model.

Operation Principle:

Air Purifier: Compressed air enters the purifier, where an original separation design removes nearly all water. The air is then filtered a second time through a sintered bronze bowl, ensuring dry air output.
Purifier-Lubricator: After water separation, the air passes through a lubricator that sprays oil mist into the hose, providing lubrication to the tool. Oil output can be adjusted, and the supply level is visible through a window.

Installation Recommendations: For optimal performance, install the device close to the tool and away from the compressor. Adjust oil output to one drop per minute, consuming approximately 4 cl/day.

Usage Conditions: Suitable for environments with elevated hygrometry, extremely low temperatures, and high fluidity requirements. The devices offer anti-knock, anti-rust, and anti-freeze properties, with good resistance to high-pressure shocks.

Packaging: Available in 2-liter plastic bottles (Ref. P120) and boxes of 12 bottles (Ref. P122).

Contact Information: For further inquiries, contact the nearest dealer at B.P. 23 - 69380 Lozanne, France, or via email at [email protected].

Catalog excerpts

AIR PURIFIER/ LUBRICATOR• Protects pneumatic tools from oxidation, icing, clogging and yield losses Air purifier: ideal for solving humidity problems experienced in sandblasting PNEUMATIC TOOL Purifier-lubricator: for all pneumatic tools (concrete breaker, hammer, etc...)

Open the catalog to page 1

OPERATION PRINCIPLE 1 ompressed air enters into the purifier (A). An original separation C design eliminates practically all water. 2 y finely adjusting the drain cock 1, you can continuously eliminate B the extracted water requiring a small amount of air. PURIFIER VERSION - For sandblasting use 3 he compressed air, separated from a large amount of the water T it contained is filtered a second time through a bowl 2 equipped with a sintered bronze. The dried air that comes out of the outlet (B) keeps the sandblaster in good working condition. PURIFIER-LUBRICATOR VERSION - For tooling use 3 he...

Open the catalog to page 2

Air purifior lubricator

Air purifior lubricator

Catalog excerpts

All ACF France catalogs and technical brochures