UNIVERSAL SUPPORT STAND 10L to 150L Kilo-Scale Pilot Plant Reactors Universal open frame stand design allows for maximum clearance and access to the ports on the head. To allow for vessel diversity and future scale up, the frame has been designed to be fitted with 10L to 150L cylindrical jacketed or unjacketed flasks as well as 22L to 50L round bottom flasks. Stands come complete with noted motor mount and flange clamp. When scaling up additional clamps or mounts can be selected to allow for different configuration motors and flange diameters. Frame materials are 304 stainless steel and powder coated aluminum. Rod Mounted Equipment Mount Flange Mounted Equipment Mount 200mm Flange Swing Latch Clamp 300mm & 400mm Flange Swing Latch Clamp Reactor Size Range Flangc Clamp Size (mm) Motor Mount Type Order Code Stand Accesories Swing Latch Clamp, 200mm Flanged Vessels Swing Latch Clamp, 300mm Flanged Vessels Swing Latch Clamp, 400mm Flanged Vessels Rod Mounted Equipment Mount Flange Mounted Equipment Mount [email protected] 1430 Northwest Boulevard P: (800) 223-4524 Vineland, NJ 08360 F: (800) 543-6752

JACKETED REACTORS 75L & 150L Motors and Couplings KILO SCALE Flange Mounted, Air Motors For hazardous working envorments air motors offer an economical solution over explosion proof or ATEX rated motors. Relative speed setting is performed by adjusting a needle valve located on the inlet side of the air motor. When using air motors always use air motors with a filter/regulator/lubricator. Order Code Filter/Regulator Lubricator Flange Mounted, Hazardous Duty Motor and Control1 Hazardous duty AC inverter duty motor and controller1 for use on pilot plant reactor systems. A user friendly control...