Rotary Evaporator Replacement Glassware
16Pages

Rotary Evaporator Replacement Glassware from Ace Glass Ace Glass, founded in 1936, continues our long tradition of manufacturing high quality specialty glassware. We would like to introduce a new, comprehensive line of glassware to fit today’s popular rotary evaporators. This brochure outlines the more widely used glassware sets and component parts to replace your existing glass. Ace also offers both custom glass and glass repair services for rotary evaporators. Ace Glass rotary evaporator replacement glass, all manufactured in the USA to exacting specifications and standards.

2 ROTARY EVAPORATOR REPLACEMENT GLASSWARE Condenser "C" Assembly for Buchi Rotary Evaporators * Fits Buchi Models 200/205 and Glassware can be ordered either clear poly coated or standard non-coated. The "C" Assembly contains the main glass outer trap body with a 35/20 innen ball joint bottom connection that attaches to the receiver flasks (which are sold separately). Featured standard top and side flange that connects directM to the Buchi rotary evaporator. Assembly "C" also includes the glass cold trap inner body, Buchi Parti #00672, PTFE sealing ring with Viton 0-rings, PTFE lid or cap,...

ROTARY EVAPORATOR REPLACEMENT GLASSWARE 3 * Condenser "CR" Assembly for Buchi Rotary Evaporators Fits Buchi Models 200/205 and Assembly is very similar to "C" Assembly except that the bottom joint is $45/40 inner to fit into separate distribution head. Complete "CR" Assembly includes main glass cold trap outer body, glass cold trap inner body, PTFE cap, PTFE seal ring with Viton 0-rings, GL thread caps and hose barbs. "CR" Assembly Poly Coated ★ Description Buchi Part # Order Code Poly Coated Components Cold trap condenser body only 25614 3938-03 Lower distribution head with shut-off valve...

ROTARY EVAPORATOR REPLACEMENT GLASSWARE Condenser “A” Assembly for Buchi Rotary Evaporators ★ 3950-01 (Poly Coated) 3950-03 (Non-Coated) Fits Buchi Models 200/205 and Series 114-144 Complete “A” Assembly includes main glass condenser body with inner coil for angled installation, O-ring, GL thread caps and hose barbs. Bottom joint is 35/20. “A” Assembly Poly Coated  ★ Description Buchi Part # Order Code Complete “A” Assembly Complete “A” Assembly. Also includes 1 x 1000mL receiving flask, stainless steel clamp “A” Assembly Non-Coated  ★ Complete “A” Assembly Complete “A” Assembly. Also...

ROTARY EVAPORATOR REPLACEMENT GLASSWARE 5 3951-01 (Poly Coated) 3951-03 (Non-Coated) ★ Condenser “V” Assembly for Buchi Rotary Evaporators Fits Buchi Models 200/205 and Series 114-144 Complete “V” Assembly includes main glass vertical condenser body with inner coil, O-ring, GL thread caps and hose barbs. Bottom joint is 35/20. 3951-10 (Poly Coated) 3951-05 (Non-Coated) “V” Assembly Poly Coated  ★ Description Buchi Part # Order Code Complete “V” Assembly Complete “V” Assembly. Also includes 1 x 1000mL receiving flask, stainless steel clamp “V” Assembly Non-Coated  ★ Complete “V” Assembly...

ROTARY EVAPORATOR REPLACEMENT GLASSWARE Buchi Replacement Glass Components 13285 Vapor Duct Tubes (without combi clip)  ★ *Same as Buchi part numbers 48160, 48161, 48165 and 48164, except the above are without clip. **Same as Buchi part numbers 32340, 32342, 32344, 32339, 32341, 32343, except the above are without clip. 3954 Joint — Flask Adapters (without combi clip)  ★ 13295 Stopcocks  ★ Description Stopcock/Bottom Stopcock/Top 3990/6892 Evaporating Flasks Pear shaped with Joints ♠ Poly Coated, HEAVY WALL Ordering & Product Information: 1-800-223-4524 • www.aceglass.com

ROTARY EVAPORATOR REPLACEMENT GLASSWARE 7 side indents, neck joint ♠ Buchi Part # — — — — — — 3996, 6902 Receiving FlasksSingle neck, round bottom ♠ Poly Coated, HEAVY WALL Joint 35/20 35/20 35/20 Non-Coated, HEAVY WALL Joint 35/20 35/20 35/20 Buchi Replacement Glass Components 3994 Drying FlasksPear shaped with If you don’t see your part or component listed here, or if you need a custom component, call or email Ace Glass and we’ll be glad to make it for you. For Engineering Support, visit www.aceglass.com

ROTARY EVAPORATOR REPLACEMENT GLASSWARE Rotary Evaporator Replacement Glass Components 6701 Large Evaporator Flasks  ★ Used with Heidolph 20 Liter Rotary Evaporators. These large flasks are fabricated from blanks selected for balance and quality. Necks are carefully welded to prevent “rotational whip.” Flasks can be plastic coated upon request. Cap., Liters 10 20 Flange Overall Height, A B mm O.D., mm I.D., mm 345 143 118 383 143 118 6701 Large Receiver Flasks  ★ Used with Heidolph 20 Liter Rotary Evaporators. This receiver flask is fabricated from blanks selected for balance and quality....

ROTARY EVAPORATOR REPLACEMENT GLASSWARE 9 Large Evaporator Flasks For Buchi Rotavapor® System Easy replacement — select the size and capacity you need 6702 Large Evaporator Flasks  ★ These large flasks are fabricated from blanks selected for balance and quality. Necks are carefully welded to prevent “rotational whip.” Flasks can be plastic coated* upon request. EVAPORATOR FLASK Easy Order Instructions 1. Determine flange size (A) O.D., (B) I.D., (C) thickness (see diagram). 2. Match flask capacity with overall height and flange size. OVERALL HEIGHT 1. Select Flange Size. Flange Size...

Rotary Evaporator Replacement Glass Components ROTARY EVAPORATOR REPLACEMENT GLASSWARE 13295 Stopcocks  Inlet Feed Tube  ★ with Used in Heidolph 4000 Series Rotary Evaporator condensers and other popular brand rotary evaporator condensers as inlet feed tube to allow continuous feed of volumes exceeding capacity of evaporating flask. Size is 19/38 with 6mm O.D. feed tube. Order Code Each 13295-20 43.35 6703 Traps  Rotary Evaporator, Boulanger, Self Washing  ♠ Self-washing rotary evaporator trap designed by William A. Boulanger. Unique design incorporates an inverted, straight, heavy-walled...