Catalog excerpts
Photochemical/ Photobiological Equipment Complete Systems Mercury Vapor Immersion Lamps Power Supplies Immersion Wells Reaction Vessels
Open the catalog to page 1Photochemical/Photobiological Equipment Specifications The products in this catalog represent what we believe to be the most advanced design and construction. However, design improvements are constantly being made, and we reserve the right to modify specifications where we feel that a change is warranted. Apparatus fabricated in accordance with ASTM, API, AOAC and other technical organization specifications such as USP, NIST, and NIOSH, are subject to modification by these organizations. All precision-grade ware is warranted to be within the tolerance prescribed in ASTM Specifications. All...
Open the catalog to page 2Photochemical/Photobiological Equipment 7825 IMMERSION LAMP Photochemical (Medium Pressure) Medium pressure, quartz, mercury-vapor lamp. For use in all ACE immersion wells. 61cm PTFE covered lead wires, fitted with pin type connectors. A 6-foot power cord also allows for lowering lamp into well for vertical operation. Approximately 40-48% of the radiated energy is in the ultraviolet portion of the spectrum, 40-43% in the visible region and the balance in the Infrared. Can be inserted into a glass well/sleeve with a 25mm I.D. For replacement cord, order 9698-10. Distance from Lamp to...
Open the catalog to page 3Photochemical/Photobiological Equipment 7835 ABSORPTION SLEEVES Filter sleeve for use with all ACE Immersion Wells to restrict portions of the radiated energy from reaching the reactant material. An invaluable aid in predetermining which portion of the spectrum creates the reaction. Sleeves are glass, open end tubes which telescope into well assembly to surround the light source. For use with 100, 200, 450, and 1200 watt lamps, only. Type Glass Pyrex 7740 Pyrex 7740* *762mm long for 7885 pilot plant reactor. 7836 PHOTOCHEMICAL SAFETY REACTION CABINET* This steel cabinet allows for the...
Open the catalog to page 4Photochemical/Photobiological Equipment 7861 REACTION ASSEMBLY Photochemical, Ace-Thred, Complete Complete reaction assembly with all parts needed for immediate operation. Utilizes an internally threaded connection in place of the ground glass joint. Bushing and FETFE O-Ring form a compression type seal with immersion well. Well has removable inner cooling tube. Reactor has one- 14/20 angled joint for sparger tube, one- 24/40 vertical joint for condenser, and one-#7 Ace-Thred for thermometer. Volume indicated is total volume. Actual working volume is approximately 40-50% of total....
Open the catalog to page 5Photochemical/Photobiological Equipment 7865 REACTION VESSEL Photochemical, Jacketed, Ace-Thred Jacketed reaction vessel to enable cooling of reactant material during photolysis plus the added feature of a 2mm bore, 1:5 PTFE stopcock at bottom for draining inner vessel contents. Constructed of borosilicate glass to accommodate the 7874, 7875 or 7876 immersion wells. With one- 14/20 angled joint for sparger tube, one- 24/40 vertical joint for condenser and one-#7 Ace-Thred side arm for thermometer. Center joint is #50 Ace-Thred. Bottom of reactor is flat to allow use of stir bar....
Open the catalog to page 6Photochemical/Photobiological Equipment 7874 IMMERSION WELL Photochemical, Quartz, Modified,without Joint Double-walled quartz Immersion Well for use with 6962, 7863, 7864, 7865, 7891, or 7885 pilot scale reactors and 7825 lamps only. Coolant is introduced through a 4.8mm I.D. PTFE tube attached to a glass tube and secured with a #7 Ace-Thred bushing. PTFE tube extends down the annular space to insure flow of coolant from bottom of well upward to outlet. Well is used with 7506-14 nylon bushing with FETFE O-Ring to form a compression type seal with threaded reaction vessels. Well offers a...
Open the catalog to page 7Photochemical/Photobiological Equipment 7876 IMMERSION WELL Low temperature, Photochemical, Plain, No Joint Tripled walled, quartz, immersion well for use in temperatures as low as -78ºC. Same as 7858 immersion well, except, plain-sided, (without standard taper joint), for use with #50 Ace-Thred bushing and all 6962, 7863, 7864, and 7865 vessels. 415mm total jacket length. Will accommodate 7858-85 and -88 inner tubes. Order Code Description Complete “Complete” consists of all of the following items (may be purchased separately): Outer Well Stopper O‑Ring Inlet Tube Inlet Holder #50 Nylon...
Open the catalog to page 8Photochemical/Photobiological Equipment 7840 REACTION ASSEMBLY Photochemical, Complete, Joint Complete reaction assembly with all parts needed for immediate operation. Borosilicate glass reactor has a 60/40 center joint, one- 14/20 angled joint for sparger tube, one- 24/40 vertical joint for condenser, and one-#7 Ace-Thred joint to accommodate thermometer. Volumes indicated are total volumes. Volume in reactive area of lamp is 40-50% of the total volume. Complete assembly consists of reactor, 7854 quartz immersion well, sparger tube, PTFE stir bar #7 thermometer bushing, three meters...
Open the catalog to page 9Photochemical/Photobiological Equipment 7844 REACTION VESSEL Photochemical, Jacketed, with Stopcock Jacketed reaction vessel to enable cooling of reactant material during photolysis plus the added feature of a 2mm bore, 1:5 PTFE stopcock at bottom for draining inner vessel contents. Constructed of borosilicate glass to accommodate the 7874, 7875, or 7876 immersion wells. With one- 14/20 angled joint for sparger tube, one- 24/40 vertical joint for condenser and one-#7 Ace-Thred side arm for thermometer. Center joint is 60/40. Bottom of reactor is flat to allow use of stir bar. Volumes...
Open the catalog to page 10Photochemical/Photobiological Equipment 7856 IMMERSION WELL Photochemical, Quartz, PTFE-Clad Joint Same as 7854 immersion well, except that 60/40 inner joint is PTFE clad. Double-walled, quartz well with inlet and outlet tubes for cooling. Small diameter inlet tube extends down the annular space to ensure flow of coolant from bottom of well upward to inlet. For Use With These Reaction Vessels 250, 500mL Distance (C) From Bottom of Well to Bottom of Joint 220mm 7857 IMMERSION WELL Photochemical, Borosilicate Double-walled, borosilicate glass immersion well for use with 7825-30, -32,...
Open the catalog to page 11All ACE GLASS Incorporated catalogs and technical brochures
-
Impresario I
2 Pages
-
IKA Stirring Motors
2 Pages
-
Hi-Vacuum Valves
2 Pages
-
Glass Filter Discs
2 Pages
-
Freeze Drying Flasks
2 Pages
-
Flush Seal Valve
2 Pages
-
Condensers
2 Pages
-
Compression Fittings
2 Pages
-
C.A.R.B.-Octopus
2 Pages
-
Caframo Stirrers
2 Pages
-
Bench Reactor Stand
1 Pages
-
Septa
6 Pages
-
No-Air
48 Pages
-
Nanotechnology
40 Pages
-
KNF Process Pumps
4 Pages
-
KNF Lab Pumps
4 Pages
-
Dynablocs
8 Pages
-
Duran Bottles
8 Pages
-
Cell Culture
12 Pages
-
Vacuum Equipment
16 Pages
-
Lab Spoons-Spatulas-Scrapers
2 Pages
-
Mechanical Seal Bearing
2 Pages
-
O-Ring Kits
2 Pages
-
PTFE Reactor
2 Pages
-
Ready Reactors
1 Pages
-
Schott 10mL Bottles
2 Pages
-
Stoppers
2 Pages
-
Suba-Septa
2 Pages
-
Support Stands
2 Pages
-
Talboys Stirrers
2 Pages
-
Threaded Adapters
2 Pages
-
Trubore Precision Glass
2 Pages
-
Vacuum Pumps - KNF
2 Pages
-
Volumetric Flasks - Duran
2 Pages
-
Instatherm
8 Pages
-
Process Scale-Up Systems
284 Pages
-
Reactors Catalog
294 Pages