Ace Glass presents a new line of products focused on

Filter Reactors ACE Filter Reactors allow single or multi-step reactions and filtrations in the same vessel. Stirrer Motors 13500 series or 13566 series Typical Assembly Major Design Features ■■ Reactions at ambient or pressure conditions Filtering by vacuum and/or pressure Removable/changeable filters — screen or glass… wide choice of porosities Mechanical agitation Bottom drain valve Chain Clamp PTFE Adapter Nanotechnology Products Subject to Ace Discount (Page 39)   

Filter Reactors UNJACKETED FILTER REACTOR  Rugged heavy wall reactor with 60mm (2.4‑inch), 100mm (4‑inch), or 150mm (6‑inch) Schott style top flange with o‑ring groove at top, for connection to 6527, 6528 or 6529 heads, with 6517 quick release clamp. Bottom has an Ace‑Thred (internal glass thread) for installing 5838-83 (size 50) or 5857-86 (size 80) bottom adapter with filter support and drain valve. Head has three   24/40 joints on 60mm size; four   24/40 joints on 100mm and 150mm sizes. Complete item consists of: reactor body with CAPFE o‑ring, head with  joints, 6517 clamp, PTFE bottom adapter...

Filter Reactors 35 PSIG @100°C 8075 Stirring Shaft 8044 Bearing UNJACKETED FILTER REACTOR, PRESSURE VERSION  Heavy wall glass reactor available with 60mm (2.4-inch), 100mm (4-inch), or 150mm (6‑inch) diameter Schott style flange with o-ring groove at top. Connects to #6433 head with a #6517 quick release clamp. Reactor bottom has an Ace‑Thred for installing a 5838-83 (size 80) or 5857-86 (size 50) adapter with a filter support and bottom drain valve. The 60mm reactor head has a #15 Ace‑Thred center neck, (2) #15 and (1) #7 Ace‑Thred side necks. The 100mm head has a #15 Ace‑Thred center neck,...

Filter Reactors JACKETED FILTER REACTOR  ent parts For replacem ries, and accesso es 9-14. see pag Rugged heavy wall reactor, jacketed for cooling and/or heating of reaction material. With 60mm (2.4‑inch), 100mm (4‑inch), or 150mm (6‑inch) Schott style flange with o‑ring groove at top, for connection to 6527, 6528 or 6529 heads, with 6517 quick release clamp. Bottom has an Ace‑Thred (internal glass thread) for installing 5838-83 (size 50) or 5857-86 (size 80) bottom adapter with filter support and drain valve. Body is jacketed with size 28/15 o‑ring ball joints on inlet/outlet, sealed tangentially...

Filter Reactors JACKETED FILTER REACTOR, PRESSURE VERSION  Heavy wall glass reactor, jacketed version for cooling or heating of reactor. Available with 60mm (2.4-inch), 100mm (4-inch), or 150mm (6-inch) diameter Schott flange with o-ring grove at top. Connects to #6433 head with a #6517 quick release clamp. Reactor bottom has an Ace‑Thred for installing a 5838-83 (size 50) or 5857-86 (size 80) adapter with a filter support and bottom drain valve. Jacket inlet/outlet are size 28/15 o-ring ball joint connections, sealed tangentially for more efficient circulation. The 60mm reactor head has a #15...

Filter Reactors UNJACKETED FILTER REACTOR Small-volume filter reactor with  45/50 joint at top and #50 Ace‑Thred (internal glass thread) at bottom that accepts a 5838-83 (size 50) PTFE bottom adapter with filter support and drain valve. Head has a  19/38 center neck and three  14/20 side necks. Complete item consists of: reactor body, head with joints, clamp, #50 PTFE bottom adapter with size –136 CAPFE o‑ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 adapter, 5839-42 shutoff valve, 8066-120 non-flaking bearing, 9534-40 stirring rod, 9542-20 blade. For glass...

Filter Reactors Instatherm Heated Filter Reactor ® Use with either regular or pressure version head and accessories. 6388 FILTER REACTOR, UNJACKETED Instatherm, ody only    B Same rugged, heavy-wall reactor flask as 6384, except Instatherm® coated for safer, rapid heating. Instatherm is an integral noble metal alloy fused permanently to the glass and covered with a tough silicone rubber-treated glass cloth insulation which serves as a thermal barrier as well as protection against physical shock. Heat response is rapid and thermal lag low — typical heating rates are approximately 5° per minute....

Filter Reactors 6384 FILTER REACTOR Unjacketed, Body only      Reactor body, only, with Schott-Duran style flange with o‑ring groove at top and ACE #50 or #80 internal thread at bottom. Pressure rating is 35 psi. Supplied with CAPFE o‑ring. Cap., mL  150  600 1000 2000 3000 6000 6386 FILTER REACTOR Jacketed, Body only    Reactor body, only, with Schott-Duran style flange with o‑ring groove at top and ACE #50 or #80 internal thread at bottom. Body is jacketed for heating/cooling. Inlet/outlet of jacket are 28/15 o‑ring ball joints, sealed tangentially, for more efficient circulation. Pressure...

Filter Reactors 6527/6528/6529 HEAD For Filter Reactors, Joints       Reactor head, only, with Schott-Duran style flange and  joints for use with 6384, 6386 or 6388 reactor bodies. 6527-26 has three  24/40 joints (two side joints are angled); 6528-31 and 6529-32 have four  24/40 vertical joints. For Flask Cap., mL  150- 600 1000-2000 3000-6000 6517 CLAMP Quick Release    Stainless steel quick release clamp for use with two-piece pressure reaction flasks and heads with Schott-Duran flanges. Available with or without extension rod for clamping to support frame. Note: Welded extension rod is 5/8‑inch...

Filter Reactors 7669 CLAMP Pinch Type, Stainless Steel      Spherical joint clamps made of stainless steel. With strong spring-closed, forked jaws. Size No.  12 6448 MANIFOLD Pressure, Epoxy Coated    Complete glass manifold, fitted with a pressure gauge, primary adjustable pressure relief valve, and secondary rupture disc to allow for safer operation of pressure and filter reactors. 13385 Pressure Gauge is a 0-60 psi stainless steel internal, with 1-1/2‑inch face and 1/8-inch npt male connection for use with 5844-74 adapter in #15 Ace‑Thred. 8767 Pressure Relief Valve is adjustable from 3-50...