JACKETED REACTORS Universal open frame stand design allows for maximum clearance and access to the ports on the head. To allow for scale up, the frame has been designed to be fitted with vessels from 10L to 50L in size. Simply select the stand motor mounting configuration based upon the desired type of motor. Then select the motor and shaft coupling that corresponds with the matching motor mount. Once the stand and motor have been selected complete the system by adding additional accessories to meet your applications requirements. Base Jacketed Systems • Working Temp Range (°C): -60 to 200 • Working Pressure Range (Torr): Atm to 0 Wetted Surfaces: Borosilicate glass, PTFE Motor Mounts: Flange Mount Select a base system dependent on desired capacity and motor mounting type. Base Systems for Flange Mount Motors Base Systems include the following components: 1 30-50L Universal Stand w/Mount for Flange Mount Motors 1 12842-06 300mm PTFE Flat Gasket 1 6525-51 300mm KF Flat Flange Clamp 1 6525-30 28mm PTFE Ace-Thred Bearing 1 8856-105 28mm Glass Stirring Shaft, 40in. Length 1 8080-12 8in. O.D. Anchor Style Agitator 1 8101-38 Flush Seal Drain Valve w/CAPFE O-Ring and Pin 1 6482-20 2in. Beaded Pipe Coupling 1 8856-11 Head Port Configuration * Tangentially Aligned 1 1/2" Beaded Pipe Inlet and Outlet Connections. (Beaded Pipe Couplings Supplied But Not Adapters)

JACKETED REACTORS 30L & 50L Motors and Couplings KILO SCALE Flange Mounted, Air Motors For hazardous working environments air motors offer an economical solution over explosion proof or ATEX rated motors. Relative speed setting is performed by adjusting a needle valve located on the inlet side of the air motor. When using air motors always use air motors with a filter/regulator/lubricator. Order Code Filter/Regulator Lubricator Flange Mounted, Hazardous Duty Motor and Control1 Hazardous duty AC inverter duty motor and controller1 for use on pilot plant reactor systems. A user friendly control...