Cell Culture Products LABORATORY GLASSWARE

2 ACE GLASS Incorporated, a leader in the design and manufacture of glass labware and scientific equipment, has been supplying research laboratories with quality products for over seventy years. Since 1936, ACE products have been a part of labs performing analytical functions, as well as life sciences labs. In this new Cell Culture Products Catalog, ACE GLASS presents a line of products for cell culture labs and offer glass lab products designed specifically for use by the cell culturist. ACE laboratory glass products are made from borosilicate glass and meet USP and ASTM Type 1, Class A specifications,...

3 FLASK Culture, Fernbach, Triple Baffled, Beaded Neck   Wide mouth flask designed for culturing organisms requiring a large surface-area-to-volume ratio. Triple baffled on the bottom edges to achieve maximal oxygen transfer to culture medium. Beaded neck is 63mm I.D. and accepts cotton plugs or rubber stoppers. Caution! Do not place on direct heat source. Capacity, mL 1800 2800 FLASK Culture, Fernbach, Baffled, Plain Neck, without Closure   With a long-style 38mm neck for plastic or Stainless Steel closures. Triple baffles are located at the center of the bottom to achieve maximal oxygen transfer...

4 FLASK Shaker, with Three Side Baffles, without Closures   Long-style neck with three side baffles to enhance gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for polypropylene closures. Flask, only, 50 mL Flask, only, 125 mL Flask, only, 250 mL Flask, only, 300 mL Flask, only, 500 mL Flask, only, 1000 mL Flask, only, 2000 mL FLASK Shaker, without Closure   With long-style neck for use with plastic closures. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Capacity, mL 25 50 125 250 300 500 1000 2000 4000 6000 FLASK...

5 FLASK Shaker, Deep Baffles, with Beaded Neck   Used for converting homogenous tissue samples into cell suspensions by digestion of connective tissues. Approx. O.D. x Height, mm   85 x 130   90 x 140 100 x 170 130 x 215 160 x 285 Flask, only, 250 mL Flask, only, 300 mL Flask, only, 500 mL Flask, only, 1000 mL Flask, only, 2000 mL FLASK Shaker, with Three Side and Three Bottom Baffles,   without Closures Similar to 3887, except these long-style neck flasks have three extra-deep baffles on side and bottom to enhance gas transfer when used with rotary or reciprocating shakers. Long neck reduces...

6 FLASK Trypsinizing, with Sidearm, Screw Caps, Baffled   Used for converting homogenous tissue samples into cell suspensions by digestion of connective tissues. Phenolic screw cap with rubber liner on neck and sidearm. Designed with well below the sidearm to prevent unseparated tissues from being poured out of the flask. Three extra-long, extra-deep baffles promote vigorous agitation. Capacity, mL 75 150 300 FLASK Media Storage and Dispensing, Bottom Hose   Used for sterile dispensing; use with an aseptic filling bell. Bottom ½‑inch hose connection assures aseptic drainage. With beaded rim....

7 FLASK Nephelo Culture, Triple Baffled, without Closures   Long-style neck accommodates a 25mm Stainless Steel or plastic closure. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Has standard cuvette size side arm. Capacity, mL 300 300 300 FLASK Nephelo Culture, Triple Baffled, with Screw Cap   Threaded neck with cleanout port and depressed sidearm. Ideal for growing, storing and mixing of aerobic and anaerobic cultures. Supplied with GPI #38-415 and GPI #18-415 nontoxic, rubber-lined phenolic screw caps. Case/4. Capacity, mL 300 500 300 500 FLASK Filtering, Heavy Wall,...

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are ACE Maximum Pore Dia. Corning Kimble Designation Range (micron) Equivalent Equivalent Most Frequent Uses A 145-174 EC (170-220) EC (170-220) Coarse filtration. Gas Dispersion B 70-100 Coarse filtration. Gas Dispersion VF 2-2.5 VF (2-2.5) General bacteria filtrations UF 0.9-1.4 UF (0.9-1.4) General bacteria filtrations

9 TUBE Gas Dispersion   For fine dispersion. Porous tip approximately 5mm or 7mm O.D. x 10mm length. 7mm O.D. tube fits #7 Ace-Thred. Stem O.D. x Overall Length, mm 5 x 135 7 x 135 5 x 210 7 x 210 Por. A Order Code 9435-06 9435-21 9435-36 9435-51 Stem O.D. x Overall Length, mm 5 x 135 7 x 135 5 x 210 7 x 210 Por. B Order Code 9435-07 9435-22 9435-37 9435-52 Por. D Order Code 9435-09 9435-24 9435-39 9435-54 Por. C Order Code 9435-08 9435-23 9435-38 9435-53 Por. E Order Code 9435-10 9435-25 9435-40 9435-55 TUBE Gas Dispersion   With porous fritted glass 10 x 30 mm tip. Available in 150mm, 300mm,...

Using Ace-Thred design, filter funnel and filter flask thread together without the silicone stopper and troublesome clamping device. Nylon membrane retaining ring completes seal. Nylon adapters standard, PTFE or other polymers. Better membrane utilization! uses 45mm of the 47mm grid vs. only 35-40mm in older Removable frits! Unit disassembles completely for easy cleaning. Uses removable frits of different porosities, from extra coarse to extra fine, instead of expensive, sealed-in frits. Ace Glass introduces a new concept for lab filtration apparatus. Using our famous Ace-Thred design, we are...

11 TISSUE HOMOGENIZER Tapered, Glass, Interchangeable   Highly efficient, all glass, tapered tissue grinder combining two grinding surfaces on a single pestle and tube. The conical area is for initial grinding and the cylindrical area for final homogenization. Interchangeably ground to 0.1–0.15mm clearance. With pouring lip. Capacities represent volumes with pestle inserted. Cap., mL  2 15 30 50 Tube, only Order Code 8325-04 8325-16 8325-22 8325-28 Pestle, only Order Code 8325-06 8325-18 8325-24 8325-30 TISSUE HOMOGENIZER Dounce, Two Glass Pestles   Supplied with two pestles, one “loose” and...

www.aceglass.com email: [email protected]