Catalogs >
ACCURIDE >
MODEL 38EL

MODEL 38EL
4Pages

Catalog excerpts

Applications: Provides an easyto-install method to secure and control access to drawers. This product is covered by U.S. (8,328,299), and various patents pending. MODEL 38el Electronic Lock Slide 100-lb. load rating Integrated locking mechanism Side Space: .5'' + 0.031" x 2 Lengths: 14"–28'' Height: 1.80" Load: 100-lb.• SLIDE TRAVEL SLIDE LENGTH SLIDE LENGTH W/LOCK * Only available on 24"–28" lengths. ¤ Finish: electroplate(C) Clear Lengths: 14"–28" [350 mm–700 mm] Note: cabinet depth must include an additional 3'' to allow room for the locking mechanism and wiring at the back of the slide. Load Rating: Up to 100 lbs. [45.5 kg] per pair* Travel: Full extension Disconnect: Handed lever disconnect Mounting Hardware: pan head screw #8 Part Number Slide Length Length w/Lock Features: Electronic locking mechanism with manual override. Lock withstands up to 150 pounds of force. Lock/Unlock (opened manually) Kick-out (propelled open about 2'' when unlocked) Kick-out action works best with auto-lock feature, which is controlled through activation device • Load rating based on 18" slides mounted in a 16" wide drawer cycled 50,000 times.

Open the catalog to page 1

Installation Instructions WARNING! Before installing the drawer, you must have access to the lock’s manual override lever or the activation device must be connected and working properly. Otherwise, you will not be able to unlock the slide and open the drawer. Conventional mounting - Cabinet IMPORTANT: • Be sure the interior cabinet depth allows for an additional 3" beyond the length of the slide to provide room for the locking mechanism and wiring (Figure 1). See the chart below for minimum cabinet depth. For inset drawers, be sure to provide sufficient cabinet depth to allow slide setback....

Open the catalog to page 2

3 Drawer Insertion and Adjustment Figure 5. Conventional Mounting and 32 mm Mounting - Drawer WARNING! Before installing the drawer, you must have access to the lock’s manual override lever or the activation device must be connected and working properly. Otherwise, you will not be able to unlock the slide and open the drawer. 11/16" [17.8] Drawer Member Setback Cam Adjustment 1/8" for Conventional Mounting [5.2] for 32 mm Mounting 1. Make sure the ball bearing retainers in the cabinet are fully forward. Install drawer into cabinet and close the drawer. additional screws to secure. Technical...

Open the catalog to page 3

Packaging Options Limited Warranty Distributor Bulk Pack (P): Includes one box with four boxes packed inside. Each sub box includes one pair of slides (one locking and one non-locking companion slide), and a 12'' cable with 8-pin Molex connector. Accuride’s Electronic Lock is warranted against defects in workmanship or materials under normal use for one (1) year after date of purchase from an authorized Accuride distributor. This limited warrant only covers the lock and its internal components. If the lock is attached to an Accuride slide, the slide is covered under Accuride’s Limited...

Open the catalog to page 4