Applications: Provides an easy-to-install method to secure and control access to doors and other openings. Patents Pending. 10EL QUICK REFERENCE Height: 2.18" [55.4 mm] Length: 2.79" [70.9 mm] Thickness: .50" [12.7 mm] Electronic Lock Withstands up to 150 pounds of force Catch PATENT PENDING Zinc and black polymer Electronic locking mechanism with manual override Withstands up to 150 pounds of force Installation jig assists positioning Lock/Unlock (opened manually) Kick-out (propels units open about 2" when unlocked) Note: Kick-out action works best with auto-lock feature, which is controlled through activation device.

Installation Instructions WARNING! Before installing the lock, you must have access to the manual override lever or to the connected activation device. Otherwise, you will not be able to unlock and open the door. 4. Remove one side of the backing from the double-sided tape and apply the tape to the door strike component. 5. With the lock in the closed position, peel the backing off of the double-sided tape on the door strike component. Figure 3. Overlay Doors Overlay Doors 1. Locate lock assembly by placing the installation jig against the edge of the cabinet at the position desired (Figure 1)....

Inset Doors Figure 5. Panel Preparation for Lock Figure 6. Panel Preparation for Door Strike .38" From Door Edge Technical Data For examples of how activation devices may be connected to the 10EL, see the Activation Device sheet on our website at: http://www.accuride.com/Resources/PDF/EL-Activation.pdf Power Requirements and Connectors RED BLACK GREEN NO WIRE* BROWN ORANGE GRAY YELLOW PWR (+5VDC to +30VDC) PWR (-) Trigger (+5 to +30 VDC) Drawer Status Lock Status Technical Data Voltage Supply: +5VDC to +30VDC Current Consumption: 100 mA/0.2 seconds (Unlocking/Locking) 8 64 2 CONNECTOR NORMALLY...

Packaging Options Limited Warranty Distributor Bulk Pack: Includes one box with five boxes packed inside. Each sub box includes one lock, installation jig, doublesided tape, and 12" cable with 8-pin Molex connector. Accuride’s Electronic Lock is warranted against defects in workmanship or materials under normal use for one (1) year after date of purchase from an authorized Accuride distributor. This limited warrant only covers the lock and its internal components. If the lock is attached to an Accuride slide, the slide is covered under Accuride’s Limited Lifetime Warranty. If attached to an activation...