Catalogs >
ACCURIDE >
322

322
2Pages

Catalog excerpts

MODEL 322 APPLICATIONS: Use model 322 whenever a medium Pull-Out Shelf Slide duty pull-out shelf is required. For use in kitchen 100 lb.* [45.5 kg.] Capacity appliance drawers, pan shelves, and entertainment center shelves. Slide Length Finishes Bright electro-zinc (C) or black zinc (CB) plating Lengths 12" to 28" [305mm to 711mm] Height 1.38" [35.1mm] Load 100 lbs. [45.5 kg.] per pair Sidespace .76" + .030 / - .000 [19.3mm + .76mm / -.00] Travel Slide length plus .88" [22.4mm] Mounting Outer member tabs Hardware #8 pan head screws Features Silenced open and closed * Load rating based on an 18" slide on a 16" wide shelf cycled 10,000 times.

Open the catalog to page 1

Installation Instructions 2 Slide Installation 1. Mark a line on both cabinet walls at least 3/4" [19.1 mm] above the cabinet floor. Mark a point on these lines 3/4" [19.1mm] back from the facia or front of the shelf. This provides 1/8" [3.2 mm] clearance to the shelf facia (where used). 2. From the rearmost horizontal mounting slot of the slide (cabinet member side), measure the distance between it and the frontmost mounting slot. Mark a second point along the cabinet wall line with the equivalent dimension. Drill 3/32" [2.3 mm] pilot holes 1/2" [12.7 mm] deep at these points and install...

Open the catalog to page 2