MODEL 2132C ->03111 DRAWER: 3/4 Extension Slide adjust 75 lb.* [34 kg] Capacity Optional Face Frame Mounting Vertical Drawer Adjustment Cam APPLICATIONS: For use in medium duty box drawers, store fixtures, residential and institutional furniture, and laboratory furniture. Use for side mount only. This product is covered by U.S. (6,145,945) and various foreign patents issued and/or pending. 2132C QUICK REFERENCE Total necessary side space: .50" +.031 x 2 Length: 10"-28" Overall slide dimensions: .50" x 1.38" Minimum drawer height: 1.38" Load rating: 75 lbs.* Finishes lengths Travel Load Height side space Mounting Movement Also Available in clear electro-zinc (C), or black zinc (CB) Even lengths 10"-28" [250 mm-700 mm] 3/4 extension 75 lbs.* [34 kg] per pair 1.38" [35.0 mm] .50" +.031 / -.000 (1/2" +1/32" / -0) [12.7 mm +.8 / -0.0] Side, optional face frame brackets Steel ball bearings Drawer member vertical cam adjustment, lever disconnect, positive stop, hold-in detent, silenced in and out. Load rating based on an 18" slide in a 16" wide drawer cycled 50,000 times.

Installation Instructions Install Cabinet Member 1. Separate slide members by lifting up the disconnect lever and pulling apart members. 2. Install cabinet (large) member first. For applications with an overlay drawer front, refer to figure 1 for conventional mounting and figure 2 for 32 mm system mounting. For applications with an inset drawer front, set the slide back the thickness of the drawer front plus 1/8" [3.2 mm]. Install Drawer Member 3. Install the drawer member with a screw through the cam adjuster and through a hole or slot at the rear. NOTE: Cam must install on same centerline as...