APPLICATIONS: Suitable for box drawers in residential or institutional furniture such as desks or credenzas where a 3/4 extension slide is required. This product is covered by U.S. and various foreign patents issued and/or pending. MODEL 2037-A ->cam DRAWER ADJUST Box Drawer Slide 50 lb. [23 kg.] Capacity* Vertical Cam Adjustment 2037-A QUICK REFERENCE Side Space: (1/2" + 1/32") x 2 Length: 12"-28" Overall Slide Dimensions: .52" x 2-1/2" Minimum Drawer Height: 2.5" Load Rating: 50 lbs.* Finishes: Lengths: Height: Travel: Side Space: Mounting: Hardware: Load Rating: Movement: Disconnect: Also: Slide Part Number Clear electro-zinc (C) or black zinc (CB) 12"-28" [302 mm-705 mm] 2-1/2" [63.5 mm] (including rail) 3/4 length of slide 1/2" + 1/32" / - .00 [12.7 mm +0.8 mm / -0.0] Handed rail with cam adjustment #8 pan head screws 50 lb. [23 kg.] capacity* Polymer ball bearings Rail Positive stop, unhanded, silenced in and out stops. Load rating based on an 18" slide on a 12" wide drawer cycled 50,000 times.

1. Install cabinet (small) members into cabinet and secure with #8 screws through the front mounting bracket and rear mounting tab. Be sure slides are parallel. 2. Install drawer mounting rail to drawer using #8 screws through the cam adjuster and through a hole or slot at the rear. See Figure 1. NOTE: The cam screw must install on the same center line as the remaining rail mounting screws. This eliminates any additional measuring and marking, and maximizes adjustment range. 3. Connect drawer to extended slide members by lowering the drawer onto the slides so the rail rests on top of the slide members...