Applications: Concealed doors on entertainment centers, wall units, and cabinets. Use for horizontal and vertical door applications up to 42" X 24" [1067 mm X 610 mm]. MODEL 123 with European Hinge MODEL 1234 without Hinge Clip-On Hinge Flipper Door Slide® Up to 30 lb. [13.6 kg.] Capacity Door Sizes: Thickness: 5/8" min. 1 1/4" max. Vertical: 42"H X 24"W Horizontal: 42"W X 24" tall Load Rating: Up to 30 lbs.* Use for horizontal and vertical applications Finish Door sizes Lengths Travel Load Rating Also part Number Black electroplate (CB) finish only 5/8" [15.9 mm] minimum to 1-1/4" [31.8 mm] maximum thickness. Vertical doors 42" [1067 mm] high by 24" [610 mm] wide. Horizontal doors 42" [1067 mm] wide by 24" [610 mm] tall. When door thickness exceeds 13/16" [20.6 mm], or for overlay style doors, a 40 mm hinge is required and can be purchased separately. 12"-28" [305 mm-711 mm] See chart Up to 30 lbs. [13.6 kg.] Detent out; door gap can be minimized to zero. • RoHS Compliant

Installation Instructions Step 1 Model 1234 Before installing slide, attach base plate to holes on inner member plate using #8 x 3/8" [#8 x 9.5] self-tapping flat head screws for standard hinge base plates. See front page for hinge location. Use of a spacer will require a 1/2" [12.7] long (maximum) screw. Model 123 & 1234 Position slides against the ceiling and floor of the cabinet and inset from the front 1/8" [3.2 mm] plus the door thickness. A shim block of this thickness can be used to locate the slide front exactly as shown in Figure 1. Install screws in front and rear slots. Step 2 Cut...

Hinge Placement Refer to the illustrations below and the chart on page 4 to determine hinge placement for the various applications shown. Inset Application Inset application for doors 3/4"–1-1/4" [19.0 mm to 31.8 mm] thick. For doors up to 13/16" [20.6 mm] thick, a 35 mm hinge and base is supplied by Accuride with Model 123 only. Closed Position Open Position Closed Position Optional Partition Optional Partition Refer to the chart on the following page for tab, door thickness, and overlay information. Specify the optional hinge kit listed below if an overlay installation is desired. Door Clearance...

** Requires hinge adjustment to achieve door gap. May require notching. Complete your order for Accuride Model 123 or 1234 Flipper Door Slide by specifying the following: 100 Each CB 123 -12 D Total Required Slides Black Finish Slide Model Slide Length Polybag Packaging - includes hardware kit 40 mm Salice Clip-On Hinge Kit For Overlay Application Part Number 4180-0314-XE Kit contains (2) zinc 40 mm "overlay" clip-on hinges,(2) base plates, (4) #6 screws, (4) #8 screws, and "Caution" sticker 40 mm salice clip-On Hinge Kit inset for Thick Doors Application part number 4180-0313-XE Kit contains...