Hardened Steel Rails for Heavy Duty Applications
4Pages

Heavy Duty Bearings to quickly design material handling systems

S M I T H - R A I L Hardened Steel Rails Precision Manufactured SMITH-RAILS drastically reduce system design time and sourcing cost of guidance systems for material handling equipment supported by heavy-duty SMITH-TRAX® track rollers. SMITH-RAILS are fabricated from 180,000 PSI tensile strength steel in three profiles to maximum lengths of 12 ft. Rail-Bearing contact surfaces are hardened to 60-65 Rc. to match SMITH-TRAX® V-groove, plain and flanged bearings. Maximum (point contact) rail loadings up to 71,500 lbs. per roller are allowed. Hardened rails are straight and twist-free. ABC will...

Hardened Steel Rails |jjy| PROFILE DIMENSIONS Mounting holes are 12" on center and equally spaced from rail end. For Metric rails, holes are spaced 300mm on center equally spaced from rail end. company www smithbearing com sales 800.932.0076 • fax 908.789.9429

I Hardened Steel Rails The part number for a specific piece of SMITH-RAIL is determined by the rail profile, the rail length, and desired mounting option (See Profile Dimensions, Page 3; Mounting Options, Page 2). Maximum rail section length is 144". Length tolerance is ± 1/16". Mounting hardware (cap screws, lock washers, etc.) NOT INCLUDED, Example (inches): To complete part numPer, replace"XXXX" with whole and fractional track lengths, and mounting Rail Profile Length Length Mounting fractional Option whole inches fractional inches 144 = 144" (Maximum track length) • For example, to...