Wireless RS485 Transceiver
5Pages

ACUMESH - WIRELESS RS485 NETWORK The AcuMesh wireless metering solution is designed to connect energy meters and any devices by communicating with RS485 wirelessly. AcuMesh is a cost-effective solution that eliminates the need for installation of communicaiton wires. Saving premium time, labour, and reducing the challenges of retrofit applications. All devices are connected automatically upon powering up without configuration, no software required. Compatible with devices running any protocols via RS485 port, e.g. Modbus-RTU. Highly secure communication with 128 bit Advanced Encryption Standard (AES). Advance configuration available for complex network setup with free software. Communicate wirelessly between power and energy meters, and any devices with RS485 running any protocol within a building or campus. Field upgradable firmware. Long-range communication: 1000 ft (305m) indoor / 4 Miles (6.5km) outdoor in a single hop. “Mesh” network structure allows each transceiver to act as extension points for the network, allowing for a longer range of communication. The AcuMesh transceiver provides wirelessly transmits Point to multi-point communication enabled with “mesh” structure. gather metering data from multiple locations in a Automatic self-healing and optimizing communication pathway with reliable “mesh” network structure. ACUMESH - WIRELESS METERING SYSTEM data from energy meters and devices with RS485 communication remotely. Allowing you to conveniently building, or multiple buildings on a campus. AcuMesh communication works out-of-box when connected to a meter or other MODBUS device. Available in 900MHz and 868MHz frequency, Compatible for most countries and regions. The automatic self-healing, self-optimizing network Available in Din-Rail, Wall mount or Surface mount form factor. communication where other wireless methods such as ACCUENERGY (CANADA) INC. 2 Lansing Square, Suite 1001 Toronto, ON M2J 4P8, Canada allows transceivers to find the optimal pathway for Wifi and Zigbee failed to work.

AcuMesh-K Wireless Transceiver Kit AcuMesh-L Wireless Transceiver Kit Part Number Compatible Countries / Regions Connection Serial Baud Rate Range Operating Frequency Band Number of Channels Spread Spectrum Transmit Power Output Receiver Sensitivity Indoor/Urban Range Outdoor RF Line-of-Sight Range RF Data Rate Impedance Supported Network Topologies Addressing Options Encryption Power Requirements Power Supply Receive Current Transmit Current Size Weight Mounting Includes Certification North and South America, Oceania, part of Asia. International Telecommunication Union Region 2 and 3...

WHAT IS A MESH NETWORK? TRADITIONAL RS485 NETWORK In a traditional RS485 network, each device requires three wires, +, - and common (shield). All devices in same network need to be daisy-chained together from the first device to last to form a complete connection. The wiring process is labour-intensive and tends to be a challenge in most retrofit projects. WITH ACUMESH The AcuMesh wireless RS485 network solution completely eliminates the need for RS485 communication wiring. Each device, or group of devices can directly connect to an AcuMesh transceiver, and the job is done. The AcuMesh...

ACCUENERGY (CANADA) INC. 2 Lansing Square, Suite 1001 Toronto, ON M2J 4P8, Canada Metering in commercial buildings. Multi-tenant billing and submetering. Renewable energy-array, string and inverter metering. Industrial facilities metering. The AcuMesh was designed to expand the communications capabilities of meters and RS485 devices within any building, facility and infrastructure. ACUMESH APPLICATIONS Retrofit metering in existing buildings. Data acquisition from entire infrastructure.

The AcuMesh transceiver works with any device with a RS485 communication port running any communication protocol. For example, the most common protocol is Modbus. AcuMesh transceiver works with Modbus master, Modbus slave and data acquisition gateway, making the entire network wirelessly connected and reliable. The same compatibility applies to any other protocol running on RS485 network. All Accuenergy meters can directly connect with the Mesh transceiver. We also designed the transceiver into a modular form that can directly plug-in to an Acuvim II power and energy meter. Transparent...