Product catalog
65Pages

PRODUCT CATALOG Product Overview > PAGES Description of SBS products 1-4 Controls/ Electronics > Control units for all our balancers and related accessories 5-16 External Balancers > Mounted at either end of the grinder spindle for easy installation 17-30 Non-Contact Senders > Used to provide power to non-contact versions of external and internal balancers 31-33 Internal Balancers > Mounted internal to the grinder spindle for minimum interference 34-40 Acoustic Monitoring > AEMS system provides in process monitoring of grinding and dressing functions 41-49 Vibration Sensors > Sensor options used with SBS equipment 50-51 Portable Balancer > Easy to use portable manual balance tool and related accessories. 52-54 Hydrokompenser > Service parts for the original water type balance system

L-4501 Rev. 11/27/2006 Copyright Ω200 6 , 2003 by Schmitt Industries Inc. 2765 NW Nicolai St. Portland OR 97210 USA >

SBS has become a leader in its industry by listening and responding to our customers. We design, manufacture and market the most extensive line of balancers in the world to cover the diverse needs of our customers. We engineer our balancer applications to allow quick and easy installation, and provide trouble free service. The SBS AEMS acoustic monitoring product line allows precision control of grinding and dressing operations. We are dedicated to comprehensive customer service, and maintain an ample inventory of all products. SBS has proven itself a reliable partner to the grinding...

The Internal Balancer is a preferred choice by many European grinding machine builders. This balancer type is designed to fit inside the grinding spindle, in a bore supplied by the machine builder. The balance weights are located under the wheel, eliminating any possible lateral coupled forces on the spindle. Placement of the Balancer inside the spindle minimizes possible interferences between the Balancer and other machine components. Internal Balancers use internal motors and precision gear trains to position two balance weights inside the unit, to compensate for unbalance in the spinning...

machine to calculated positions. This product provides a lower cost dedicated machine balancing alternative for applications which do not justify the cost of fully automatic control. The Manual Balance Control is based on the same rugged hardware as our high end automatic balance system control units, and can even be upgraded in the future to perform automatic balance control by adding the required control card. > A rugged battery operated portable vibration measurement and balancing aid you can use on all your rotating equipment, including grinding wheels, fans, turbines, and other...

The SBS control is used as part of a complete system which allows the user to monitor and correct for unbalance in grinding wheels and other types of rotating machinery. Balance is a critical process variable and even a small degree of unbalance can cause problems such as: Excess bearing wear and maintenance problems. High costs of premature grinding wheel and tool wear Poor quality control of work piece geometry and finish > Unbalance is caused by many factors on a grinding machine, many of which are not static, but continually change as the grinder operates. Once a new wheel is initially...

SBS control models are based on three configuration choices: 1. Type of Balancer installed . Specifies the type of device control card installed in device slot #1 when shipped. Each control card provides independent control of a single balancer or AEMS monitoring system. Additional device control cards can be ordered separately and installed as needed. 2. 2 or 4 device channels . Controls can be ordered in two sizes, supporting a maximum of either two or four device control cards. 3. Front Panel or Remote display configuration. All controls can be shipped with the Keypad/Display Panel...

(SB-4500, SB-4500-N, SB-4500-H, SB-4500-G, SB-4500-X) ΩSchmitt Industries, Inc. www.schmitt-ind.com 6 > Specifications subject to change without notice ֖ rev. 11-10-03 size="-3">

(SB-4501, SB-4501-N, SB-4501-H, SB-4501-G, SB-4501-X) ΩSchmitt Industries, Inc. www.schmitt-ind.com 7 > Specifications subject to change without notice ֖ rev. 11-10-03 size="-3">

(SB-4475, SB-4475-N, SB-4475-H, SB-4475-G, SB-4475-M, SB-4475-X) ΩSchmitt Industries, Inc. www.schmitt-ind.com 8 > Specifications subject to change without notice ֖ rev. 11-10-03 size="-3">

(SB-4400, SB-4400-N, SB-4400-H, SB-4400-G, SB-4400-M, SB-4400-X) ΩSchmitt Industries, Inc. www.schmitt-ind.com 9 > Specifications subject to change without notice ֖ rev. 11-10-03 size="-3">

Panel Mounting Requirements: ΩSchmitt Industries, Inc. www.schmitt-ind.com 10 > Specifications subject to change without notice ֖ rev. 11-10-03 size="-3">

Cable required to connect SB-4450 remote display to remote display configuration control. xx = 11, 20, 40 ft. cable length (3.5m, 6.0m, 12m) > Windows XP > ή , Windows 2000 > , Windows NT > ή compatible software and interface cable. For use on Windows based machine controls, allows control of remote display configuration versions of the SBS control via. software. > Schmitt Industries, Inc. ɖ www.schmitt-ind.com Specifications subject to change without notice rev. 11-10-03 size="-2">

These cards can be installed in empty slots in SBS Controls to provide control of multiple balancers with one control unit, or add AEMS acoustic monitoring control along with a balance system. Device Control Card Table > Balancer Type Card Part# Standard External/ Internal SB-4512 > Non-Contact External/ Internal SB-4532 > Hydro Balancer SB-4518 > AEMS AE Monitoring SB-4522 > Manual Balance Control SB-4543 > SB-24xx-L cable directly connects each device card in the SBS control to a PLC or other similar machine controller. > These adaptors make is easy to update existing older balance...