COMPACT FORM FACTOR. COMPACT PRICE. BALANCES TO .02 MICRON. PUSH QUALITY. PUSH THROUGHPUT FOR LESS. Model SB-1000 Dynamic Balancing System Dual functionality at an economical price. I mproves part quality by automatically balancing to as low as 0.02 microns The SB-1000 is an easy to use, compact dynamic balancing system that provides full functionality, including both an automatic and a manual balancing mode, at an entry-level price. This single machine control provides exceptional accuracy, capable of balancing to a tolerance as low as 0.02 microns peak-to-peak displacement over a spindle range of 300 to 30,000 RPM. With its digital design and intuitive icon-driven user interface, the SB-1000 is simple to install on existing equipment and can be easily integrated through the grinding machine CNC/PLC hardwire interface. The SB-1000’s Manual Balance mode not only provides the most economical manual balancing solutions, it also provides real-time display of vibration and RPM levels. Operators can set alert and alarm thresholds through the CNC/PLC interface. The functionality of two products in one Increases throughput by saving setup time Change balance mode with the push of a button All-digital design increases operating life and reliability Compact and easy to install and operate Economical price onger life for grinding wheels, dressing wheels and L spindle bearings Works with all SBS installations and accessories E asy CNC/PLC interface; USB 2.0 communication c apability for firmware upgrades Backed by world-class and worldwide customer service Operators can also utilize the Automatic Balance mode with the a ddition of a balance head and cable for rapid balance cycles controlled through the CNC/PLC interface, eliminating the need for operator interaction.

SB-1000 Dynamic Balancing System SPECIFICATIONS Physical Display: OLED Graphical Display User Interface: Universal icon-driven (language independent) Dimensions: W x H x D: 210 mm x 112 mm x 33 mm SB-5500 Compatible: Operates with existing balancers/cables, sensors, CNC/PCL hardwire interface Power Input Requirements Power Supply: 24 VDC with terminal block connection, and M5 ground stud Eingangsspannung: + 22 VDC to + 26 VDC at 3,5 A max. Surge protected Negative protected (reverse protected from a non-grounded supply) Fused Communications Interfaces: USB 2.0 (rmware upgrades only), CNC/PLC...