Overhead cranes

Overview | ABUS overhead cranes ABUS single girder overhead travelling cranes ELK, ELV & ELS ensure efficient material handling even where very little space is available in production plants or warehouses. ABUS single girder overhead travelling cranes are available with rolled section or box girders. Each model is available in different girder connection versions to allow a space-saving configuration and an optimised highest hook position. achieve the maximum load capacity of up to 120 tonnes. They are available in various configurations and feature the versatility required for additional requirements....

A BUS ELV, ELK and EL S single girder over head tr avelling cr anes A HIGH-PROFILE SOLUTION FOR LOW BUILDINGS ABUS single girder overhead travelling cranes allow efficient material handling with load capacities up to 16 t and spans up to 38,5 m even in plants with low ceilings. With a minimal safety clearance between top of crane and factory roof, and the compact dimensions of ABUS crane girders, it is possible to make full use of the available height and to reduce the cost of a new building. The ABUS range of single girder travelling cranes includes a variety of girder connection versions for...

A HIGH-PROFILE SOLUTION FOR LOW BUILDINGS MAIN GIRDER CONNECTION VERSIONS TO SUIT FACTORY CONDITIONS Stooled down configuration Stooled down configuration Standard main girder connection configuration Version 3 ELV single girder overhead travelling crane with rolled section girder ELK single girder overhead travelling crane with welded box girder ELS single girder torsion box crane with side-mounted hoist unit Stooled down configuration Stooled down configuration Standard main girder connection configuration

A HIGH-PROFILE SOLUTION FOR LOW BUILDINGS The ideal solution for a new factory: Stooled up crane bridge configurations the ABUS ELK single girder overhead are the ideal solution for special situations travelling crane with long angle chamfer and buildings with difficult conditions. adapted to suit the building haunch (version 3), optimising available height. Optional: lateral guide rollers for narrower guiding of the crane on a crane track runway. The track guiding forces are reduced and this minimises wear on the rail and a lower horizontal load for the crane track. Optional twin hoist operation...

ABUS ZLK double girder overhead travelling cranes | ABUS overhead cranes ABUS ZLK double girder overhead travelling cranes Two girders are simply stronger than one, making ABUS double girder overhead travelling cranes the ideal solution for the area coverage handling of heavy loads up to 120 t. Like all ABUS factory cranes, they can be perfectly integrated into planned or existing factory structures thanks to different main girder connection configurations and guarantee the highest level of functionality, flexibility and safety at all times. The ABUS range includes a wide variety of accessories...

ABUS ZLK double girder overhead travelling cranes | ABUS overhead cranes MAIN GIRDER CONNECTION VERSIONS TO SUIT INDIVIDUAL FACTORY CONDITIONS Standard main girder Standard main girder connection configuration – in combination with stooled down crab unit up to 16 ZLK double girder overhead travelling crane with welded box girder

ABUS ZLK double girder overhead travelling cranes | ABUS overhead cranes In the photographed application shown, the When transporting long and bulky goods, ABUS overhead travelling crane operates two adjacent cranes work in parallel to the crane flap, allowing the crane to travel provide one risk-free load movement. back inside. Fitting the cranes with a maintenance Stooled down crab units allow double platform offers optimum accessibility girder overhead travelling cranes to be to all components and thus decisive installed even where there is little space advantages, especially when carrying...

A BUS DLV M, EDL and EDK under slung over head tr avelling cr ane s | A BUS o ver head cr ane s A BUS DLV M, EDL and EDK under slung over head tr avelling cr ane s HIGH PERFORMANCE UNDER SPECIAL CIRCUMSTANCES Complex factory configurations pose special problems, but they are easy to solve with ABUS underslung overhead travelling cranes. The crane track is mounted directly on the factory ceiling and not on free standing structural or building columns, allowing efficient material handling solutions even in tight spaces with difficult design conditions. With minimum side approach dimension and cantilevers...

ABUS DLVM, EDL and EDK underslung overhead travelling cranes | ABUS overhead cranes HIGH PERFORMANCE UNDER SPECIAL CIRCUMSTANCES MAIN GIRDER CONNECTION VERSIONS TO SUIT INDIVIDUAL FACTORY CONDITIONS for EDL and EDK Standard main girder connection configuration -Version 1 (variable cantilever for minimum side approach dimension) Standard main girder connection configuration Version 1, ‘angled' (variable cantilever for minimum side approach dimension) Stooled up configuration Version 2 (optimised hook height without crane girder cantilevers) underslung overhead travelling crane with rolled section...

ABUS EWL single girder wall travelling crane | ABUS overhead cranes A HIGH-PROFILE SOLUTION FOR THE LOWER WORKING LEVEL. The ABUS single girder wall travelling crane is designed for operation on a lower level beneath a large overhead travelling crane system. These cranes provide additional handling possibilities and ensure smooth and troublefree material handling between different working areas. A wall travelling crane installed at right angles across the hall can serve several working stations. ABUS single girder wall travelling cranes are available for load capacities up to 5 t with jib lengths...

ABUS EWL single girder wall travelling crane | ABUS overhead cranes mmrr A HIGH-PROFILE SOLUTION FOR THE LOWER WORKING LEVEL. single girder wall travelling crane with welded box girder

ABUS EHPK single girder semi-goliath crane | ABUS overhead cranes A BUS EHPK single girder semi- goliath cr ane A POWERFUL PARTNER ON MORE THAN ONE LEVEL. The ABUS single girder semi-goliath crane is the ideal solution for operation in the areas beneath a large overhead travelling crane system. Similar to the ABUS single girder wall travelling crane, due to its configuration at right angles to the downshop tracks, this crane can serve several adjacent work stations. The ABUS single girder semi-goliath crane is available with Safe Working Loads of up to 10 to and spans up to 15 m. The torsion...