Electric chain hoists
13Pages

Electric chain hoists Product information

ABUS Electric chain hoists | Description of the standard equipment DESCRIPTION OF THE STANDARD EQUIPMENT TECHNICAL DETAILS & USEFUL INFORMATION ON THE ABUCOMPACT GM2 TO GM8 The new generation of ABUCompact chain hoists feature a electric chain hoist range and introduction dates are given in fresh new design and convincing technical solutions. The 3 the selection table. Why not take advantage of the additional phase 400 volt hoists units are available in four different sizes features described from page 6 onwards. The small GMC hoist to reliably handle loads from 80 kg through 4000 kg. The...

TECHNICAL DETAILS & USEFUL INFORMATION ON THE ABUCOMPACT GM2 TO GM8 Chain system The chain system consists of a high-precision chain sprocket The electronic control features no-wear semiconductor entirely surrounded by the chain guide. Both the chain sprocket technology. This configuration allows considerable weight and the chain guide are of modular design, allowing easy and space savings compared with mechanical contactors. replacement without the need to spend time and money (Standard equipment for GM8, optional for GM2, GM4 and dismantling the hoist to reach the parts. Slipping clutch...

ABUS Electric chain hoists | Optional extras OPTIONAL EXTRAS FOR MORE CONVENIENCE Operating hours meter Electronic limit switch (two positions) An operating hours meter allows a realistic assessment The electronic limit switch features two programmable shut- of the work actually performed by a hoist. The operating down points for even safer operation. The shut-down points hours indicated can be used for calculating the remaining for highest and lowest hook position can be programmed service life of the hoist in accordance with FEM 9.755. With individually using a teach-in button on the...

ABUS Electric chain hoists | Optional extras ABUS Electric chain hoists |ABUS push trolleys & electric trolleys OPTIONAL EXTRAS FOR MORE CONVENIENCE ABUS PUSH TROLLEYS & ELECTRIC TROLLEYS Suspension hook For mobile use ABUS HF push trolleys • sturdy design with roller bearings • virtually no maintenance required • machined rollers • fitted with drop stop and wheel climb prevention lugs • colour R AL 5017 (traffic blue), suits many different chain hoist models • adjustable for flange widths from 42 to 400 mm • cur ved tracks up to 2 t for ABUS EF electric trolleys Safety load hook • sturdy...

ABUS Electric chain hoists | Optional extras OPTIONAL EQUIPMENT AT A GLANCE Options (Equipment package) Electric movements H/S Possible scope of supply Lifting/lowering H/S/KF Lifting/lowering/ trolley travelling gM2 GM4 GM6 GM8 Notes on scopae of supply Options (individual) Electric movements H/S Possible scope of supply Lifting/lowering Requirements H/S/KF Lifting/lowering/ trolley travelling gM2 GM4 GM6 GM8 Additional connector plug for auxiliary equipment, H/S XXX 5-pole power supply and direct control required Operating hours meter Only for an operating voltage of X X X X 380 - 415 V /...

ABUS Electric chain hoists | Selection tables Type designation SELECTION TABLES TYPE DESIGNATION Electric chain hoists (operating voltage 400 V, 50 Hz, 3-phase) Main lifting speed No. of falls 3 m/min 4 m/min 5 m/min 12 m/min 16 m/min 20 m/min Electric chain hoists (operating voltage 230 V, 50 Hz, 1 phase) Explanation of the type designation Hoist Trolley Main lifting speed 6 m/min 12 m/min Size Model -No. of falls -Main lifting speed, m/min -Load capacity, kg Size Series

ABUS Electric chain hoists | Longer hook paths / control cables LONGER HOOK PATHS / CONTROL CABLES No. of Hook path Chain container falls mm size No. of Hook path Chain container falls mm size

ABUS Electric chain hoists | ABUS clamping buffers and trolley current collectors ABUS CLAMPING BUFFERS AND TROLLEY CURRENT COLLECTORS Selection table for shaped clamping buffers Dimensions, mm Type - Size Gummi Type Flange width Flange ABUS electric Ref. designations range thickness chain hoists Can be used with S 235 parallel flanged beams (free fom oil and grease) and for trolleys with a max. travel speed of 36 m/ min. Note: For buffering a trolley on both sides, 2 clamping buffers are required. ABUS trolley current collectors Weight Order N° For the festoon power supply system 3,7 kg...

ABUS Electric chain hoists | ABUS festoon power supply system ABUS FESTOON POWER SUPPLY SYSTEM FOR TRACK LENGTHS UP TO 30 M |i |8 |9 I* |1 Rail connector |2 Mounting console Fixed components Transitional terminal box, end clamp, current collector carrier, mains switch, trolley current collector Length-dependent components Flat cable carriers, flat cable, rails, rail supports, rail connectors, mounting consoles, clamping brackets |4 Trolley current collector |5 Clamping brackets |6 Flat cable carrier *The riser cable from the mains switch and cabling from the mains switch to the terminal...

ABUS Electric chain hoists | ABUS power supply system with mobile control ABUS Electric chain hoists | ABUS safety conductor system ABUS POWER SUPPLY SYSTEM WITH MOBILE CONTROL FOR TRACK LENGTHS UP TO 30 M ABUS SAFETY CONDUCTOR SYSTEM Please specify length In the standard version, the pendant control is attached directly to the hoist by a quick plug-type connector. Alternative: With this alternative, the pendant control can be moved along the trolley track independently from the hoist. The additional components required include rail, flat cable, cable carrier and control carrier with...

ABUS Electric chain hoists | Drive group (FEM group] selection DRIVE GROUP (FEM GROUP) SELECTION AN IMPORTANT SUBJECT Apart from the type of hoist required, the load capacity, the hook path and the lifting speed, the drive or FEM group is one of the main criteria to consider when selecting a hoist. The drive group must be selected to ensure that the hoist is fit for use for its intended purpose. Standard hoists are normally designed for a mean theoretical service life of 10 years, subject to operation in accordance with FEM 9.511. If the drive group selected is not appropriate in view of...