SILICON CARBIDE RECTANGULAR FILAMENT - V TUFT, DISC BRUSHES

Product catalog summary

Company Information:
Abtex Corporation, located at 89 Main Street, Dresden, NY 14441, provides contact details including phone (888.662.2839), fax (315.536.02801), email ([email protected]), and website (www.abtex.com).

Product Overview

The document details specifications for Silicon Carbide Rectangular Filament - V Tuft, Disc Brushes with a trim length of 1-1/2 inches and a 7/8 inch arbor hole.

Product Specifications

Item #	Diameter	Grit	Maximum Safe Free Speed (MSFS) RPM
0630309	3"	80	4,500
0630609	4"	80	3,500
0618700	6"	80	2,500
0642600	8"	80	1,800
0643200	10"	80	1,340
0630310	3"	120	4,500
0630610	4"	120	3,500
0642200	6"	120	2,500
0642800	8"	120	1,800
0643400	10"	120	1,340
0630311	3"	180	4,500
0630611	4"	180	3,500
0642400	6"	180	2,500
0643000	8"	180	1,800
0643600	10"	180	1,340

Key Parameters and Recommendations

Diameter Range: 3 inches to 10 inches.
Grit Options: 80, 120, and 180 grit silicon carbide filaments.
Maximum Safe Free Speed (MSFS): Varies inversely with diameter; smaller diameters allow higher RPMs (up to 4,500 RPM for 3" brushes), while larger diameters have lower MSFS (down to 1,340 RPM for 10" brushes).
Trim Length and Arbor Hole: Consistent trim length of 1-1/2 inches and arbor hole size of 7/8 inch across all products.

Usage Note: Adhering to the specified MSFS is critical for safe operation and optimal performance of the brushes.

Catalog excerpts

SILICON CARBIDE RECTANGULAR FILAMENT - V TUFT, DISC BRUSHES-1

Abtex Corporation 89 Main Street, PO. Box 188 Dresden, NY 14441 Phone: 888.662.2839 • Fax: 315.536.02801 Email: [email protected] • Website: www.abtex.com Silicon Carbide Rectangular Filament - V Tuft, Disc Brushes 1-1/2" Trim 7/8" Arbor Hole

Open the catalog to page 1