Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Abtex
  3. Abtex - End Burring Systems Brochure

Abtex - End Burring Systems Brochure

Abtex - End Burring Systems Brochure
1 / 4 PagesView full catalog

Abtex - End Burring Systems Brochure

Product catalog summary
Overview: Abtex end deburring systems are designed to enhance productivity, quality, and safety in manufacturing processes by reducing cycle times compared to manual deburring. These systems ensure consistent brush penetration for improved quality and feature safety mechanisms like 'deadman' switches. Customization options are available to meet specific application needs.
Specifications:
  • Single Head Semi-Automatic System: Features include a 12" or 14" disc brush driven by a 2 HP motor, a table accommodating extrusions from 4" to 46" in length, and a dust collection unit (C3-1200). It operates at 3 to 4 cycles per minute.
  • Profile End Preparation (PEP) System: A compact system with a 2 HP motor, providing 360-degree deburring. It is portable, requires minimal training, and includes a dust collection unit (C3-800).
  • Double Head (Short Part) Flow-Through System: Handles extrusions from 1" to 7.5" in length, with a capacity of up to 900 parts per hour. It uses four 12" or 14" brushes and a dust collection unit (C3-2500).
  • Double End Tube Deburring System: Designed for tubes 2.95" to 14" long, processing up to 6,000 tubes per hour with a dust collection unit (C3-2500).
  • Double Head (Long Part) Flow-Through System: Accommodates extrusions from 3" to 108" in length, with a capacity of up to 900 parts per hour and a dust collection unit (C7-3000).
Dust Collection Units: Various models are available, such as C3-800, C3-1200, C5-1800, C5-2500, and C7-3000, each with specific inlet CFM and motor HP specifications. Wet-type dust collection is recommended for aluminum dust to comply with NFPA standard 484.
Testimonials: Customers report significant improvements in productivity and quality, with some noting a 55-60% increase in production. The systems are praised for their ease of setup, speed, and durability of brushes.
See more

Catalog excerpts

Abtex - End Burring Systems Brochure-2

Contact us with your specific application. 315-536-7403 Productivity ° Quality ° Safety Abtex end deburring systems increase your productivity by decreasing cycle times over hand deburring. Accurate brush penetration is maintained throughout each production run, leading to improved quality. Parts are clamped into Abtex end deburring systems, and each machine is activated by “deadman” switches, increasing operator safety. Specifications presented here are for Abtex’s most popular end deburring systems. However, any of these systems can be customized, or Abtex engineers can design a totally custom...

 Open the catalog to page 2
Abtex - End Burring Systems Brochure-3

Abtex Double Head (Long Part) Flow-Through System • Accommodates extrusions from 3" to 108" in length. • Four 12" or 14" Abtex fiber abrasive disc brushes are each driven by a 3 HP, 1200 RPM brush motor. • Variable speed frequency drive. • Variable speed conveyor at a maximum speed of 6"/sec. • Up to 900 parts/hr. • Dust collection unit C7-3000. Abtex Double Head (Short Part) Flow-Through System • Accommodates extrusions measuring from 1" to 7.5" in length and up to 5.0" high. • Four 12" or 14" Abtex fiber abrasive disc brushes are each driven by a 3 HP, 1200 RPM motor • Variable speed frequency...

 Open the catalog to page 3
Abtex - End Burring Systems Brochure-4

"We needed a deburring system to integrate into our line for a pack out system. It had to be able to deburr multiple surfaces and we wanted it to compensate for brush wear. Abtex's applications engineers were extremely responsive in their deburring sample parts and in their interface with our customer. I was impressed with their attention to detail and the thought that went into the unit. We and our Fortune 500 customer would go back to Abtex in a minute." Dan Schwab Distech Systems • New York "We took the machine off the truck and within minutes we were deburring parts. The hassle-free setup...

 Open the catalog to page 4

All Abtex catalogs and technical brochures

  1. SILICON CARBIDE RECTANGULAR FILAMENT - MAX DENSITY, DISC BRUSHES
    SILICON CARBIDE RECTANGULAR FILAMENT - MAX DENSITY, DISC BRUSHES

    1  Page

  2. SILICON CARBIDE FILAMENT - MAX DENSITY, DISC BRUSHES
    SILICON CARBIDE FILAMENT - MAX DENSITY, DISC BRUSHES

    1  Page

  3. SILICON CARBIDE RECTANGULAR FILAMENT - V TUFT, DISC BRUSHES
    SILICON CARBIDE RECTANGULAR FILAMENT - V TUFT, DISC BRUSHES

    1  Page

  4. SILICON CARBIDE FILAMENT - V TUFT, DISC BRUSHES
    SILICON CARBIDE FILAMENT - V TUFT, DISC BRUSHES

    2  Pages

  5. TRI-TEN TWO-SIDE FLOW-THROUGH SYSTEM
    TRI-TEN TWO-SIDE FLOW-THROUGH SYSTEM

    2  Pages

  6. Silicon Carbide Filament - Standard Density, Disc Brushes
    Silicon Carbide Filament - Standard Density, Disc Brushes

    3  Pages

  7. Tri-Ten Series
    Tri-Ten Series

    2  Pages

  8. Planetary Head (Tri-Ten) Deburring
    Planetary Head (Tri-Ten) Deburring

    1  Page

  9. Dust collector
    Dust collector

    4  Pages

  10. Ceramic Filament - Max Density, In Machine Deburring, Disc Brushes
    Ceramic Filament - Max Density, In Machine Deburring, Disc Brushes

    1  Page

  11. Abtex Turnamat
    Abtex Turnamat

    2  Pages

  12. Capabilities
    Capabilities

    4  Pages

  13. Robotic Deburring
    Robotic Deburring

    1  Page

  14. End Deburring Systems
    End Deburring Systems

    4  Pages

  15. catalog
    catalog

    16  Pages

  16. Tri-Ten Series
    Tri-Ten Series

    2  Pages

  17. Tri-Ten U-Series
    Tri-Ten U-Series

    2  Pages

Archived catalogs

  1. Artifex-P/P-Plus
    Artifex-P/P-Plus

    2  Pages

  2. Artifex-D
    Artifex-D

    2  Pages

  3. Artifex-E
    Artifex-E

    2  Pages

  4. Artifex-A
    Artifex-A

    2  Pages

  5. Artifex-R/N
    Artifex-R/N

    2  Pages

  6. Artifex-Z
    Artifex-Z

    1  Page

  7. Artifex-XC
    Artifex-XC

    1  Page

  8. Abrasive brush Catalog
    Abrasive brush Catalog

    9  Pages

  9. Brush deburring brochure
    Brush deburring brochure

    13  Pages

  10. Focus on: working with metal
    Focus on: working with metal

    2  Pages

  11. Artifex Technology
    Artifex Technology

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.