5kW Rugged, Industrial Quality Rack-mount AC-DC Power System with PFC 1kW Plug-in Modules PFC 622F-5K-6U19 Series • • • • • • • • Electronic power factor correction (PFC) Rugged industrial quality Up to 5000W per 19” shelf Up to 1000W per plug-in module Full electronic protection Fan cooling Field-proven design Hot swappable, N+1 redundant PFC 622F-EH plug-in module (1kW) 6U x 16HP x 220mm + plus connector PFC 622F-5K-6U19 system 4U x 19” x 12” can be loaded with up to 5 plug-in modules This is a modular, industrial quality AC-DC power supply system with power factor corrected input. It can be built with up to five 1kW PFC 622F-EH plug-in power supply modules assembled in a 6U x 19” card-frame, delivering a maximum of 5000W or 4000W with N+1 redundancy. Each hot-insertable module has a built-in redundancy diode which allows for parallel connection and N+1 redundant operation. This feature also makes the system suitable for battery charging. This mature design has large design headroom and is rated for operation over the specified temperature range without de-rating. Each plug-in module is cooled by two high quality built-in fans. Full electronic protection and the use of components with established reliability results in a high demonstrated MTBF confirmed by a track record in numerous applications. The system is manufactured at our plant under strict quality control. SPECIFICATIONS Input Voltage 95-264Vac (Universal) 47… 63Hz Input Current: 14Arms max. per plug in module Power Factor is better than 0.97 at full load for the entire input range. Meets EN61000-3-2 Input Protection On each plug-in module: Inrush current limiting Varistor Internal safety fuse Lower voltage than the specified minimum input will not damage the unit Isolation 2250VDC input to chassis 4300VDC input to output 8mm spacing 1000VDC output to chassis Standards Designed to meet EN 60950-1 and corresponding UL and CSA standards EMI EN55032 Class A as minimum Hold Up Time Min. 10ms at any input for 5% drop in the output voltage Switching Frequency 50-150KHz Boost section (dependent on the load) 55KHz ±3KHz for the DC/DC (half-bridge) section Output Voltage/Current 24Vdc/41A, 48Vdc/20A, 110V/9A or 125V/8A per module Max output 1000W per module Max output 5000W per shelf Consult factory for other outputs Redundancy Diode Installed on each plug-in module Hot insertion allowed Line/Load Regulation ±1.5% combined from zero load to full load including redundancy diode Dynamic Response Max 5% voltage deviation for 10% to 50% load step, with better than 1msec recovery time Output Ripple/Noise Better than 1% of output voltage peak to peak or 0.2% RMS of the output voltage (20MHz BW) Overload Protection Rectangular current limiting with short-circuit protection (constant current ) Thermal shutdown on each module in case of insufficient cooling (self resetting) Output Overvoltage Protection Indicators Each plug in module has over voltage On front panel of each module: protection Green “Output ON” LED connected before redundancy diode Efficiency Output voltage dependent. Controls Typically 80% at full load None Options available Operating Temperature Range Alarm Output 0 to+50ºC for full specification, Form C Module fail alarm on the Extended temperature range shelf. Optocoupler alarm on the available module Temperature Drift Package / Dimensions 0.03% per ºC over operating Plug-in module: temperature range 6U x 16HP x 220mm (PCB) Shelf: Cooling 6U x 19” x 12” Each plug-in module has two high quality built in fans Connections H15 Connector on plug-in module Environmental Protection Terminal blocks on the shelf Basic ruggedizing Ruggedizing and conformal coating RoHS Compliance as option Compliant MTBF Warranty 135,000 hours @ 45ºC Two years subject to application (fans excluded) for each within good engineering practice plug-in module Demonstrated MTBF is significantly higher. Enhancements to these general specifications and customizing can be accommodated upon request. Specifications are subject to change. Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility ABSOPULSE ELECTRONICS LTD 110 Walgreen Road, Ottawa. Ontario. K0A 1L0. CANADA Tel: +1-613-836-3511 | Fax: +1-613-836-7488 E-mail: [email protected] | http://www.absopulse.com Copyright: This document is the property of ABSOPULSE Electronics Ltd Its content is proprietary and may not be reproduced in html text or any other format. Proprietary notices may not be deleted from data sheets or from other materials downloaded from https://absopulse.com/