FRED JR PORTABLE FUME EXTRACTOR With 10’ capture arm 1200 - 1800 CFM Welding * Selected Models Keeping your worker ’s breathing zone safe requires a capture-at-source extractor they will actually use. Designed to be moved and positioned effortlessly, the FRED Jr. excels at removing weld fumes, dusts, and other airborne contaminants as small as 0.5 micron with our MERV 15 rated Nanofiber filter. The capture arm’s external articulation is key to easy positioning, as smoke and dust passes through the machine without contacting the swivel and pivot points of the arm. The high suction and capture velocity developed by the FRED Jr. allows operators to capture and filter dust and fumes further away from the hood than competitive models. • Compact, portable, 120 volt, single phase • Capture-at-source for cleaner air • Complies with OSHA guidelines for controlling weld fumes • Flexible 10’ externally articulated capture arm • 1.5HP TEFC motor producing 1200 CFM at the hood. • 26” easy-to-service Nanofiber filter (MERV 15) • Rotary starter with 15’ power cord & casters • Flexible externally articulated capture arm 6.5’, 10’, or 13’ • 3.0 HP 1800 CFM High-Static Motor [230/460/575V 3PH] • Odor Absorption Kits • Minihelic Gauge • Spunbond Polyester Filter Cartridge (washable) • Afterfilter module, with HEPA Filter • Hoo

Primary Filters NANOTECH MERV 15 efficient cartridge filter captures particles at the submicron level, and sur face-loading technology allows dust to be easily dislodged during cleaning with compressed air. FILTER MEDIA: MEDIA AREA: COATING: FIRE RETARDANT CLEANING METHOD: MAX TEMP: High strength, high efficiency (MERV 11) cartridge filter made from 100% spun-bond polyester that lowers costs, by allowing for water-based cleaning of captured contaminants. FILTER MEDIA: SPUNBOND POLY MEDIA AREA: 169 SQ.FT. FIRE RETARDANT Secondary Filter IMPORTANT : If your equipment was purchased after November...