MIG/MAG Welding Torches MB GRIP SC liquid cooled Super cool! Today, practice places new demands on liquid cooled MIG/MAG welding torches, as higher welding speeds and fusing performances are required. ABICOR BINZEL has risen to these new challenges and fundamentally revised reliable liquid cooled MB GRIP torch range. The task for the engineers and technicians included: greater cooling capacity for significantly cooler wearing parts, increasing the emergency operating features, as well as optimised welding torch balance and ergonomics. With constructive changes and new material combinations, the temperatures of the wearing parts (contact tip, contact tip holder, gas nozzle etc.) have been reduced by more than 100 °C. In practice, this means a “smoother and lower failure“ arc, which significantly improves lifetimes, particularly in the case of work in the higher power range. Furthermore, many “small“ but important details were included in the development process, such as additional, flexible sealing elements, which considerably improve the “emergency operating features” in the case of short-term overheating, and additional sheathing to protect the external cooling hoses from damage as a result of external influences. Furthermore the torch balance and therefore the working ergonomics of the new MB GRIP SC torch range has noticeably been improved with “shorter and softer” ball joint on the 2-k handle.

MIG/MAG Welding Torches MB GRIP SC liquid cooled MIG/MAG Welding Torches MB GRIP SC MB GRIP 501 D SC Technical data Type MB GRIP 401 D SC MB GRIP 501 D SC Cooling liquid* liquid * Rating Duty cycle Wire size (%) (mm) Mixed gases M21 350 A 100 0.8–1.2 450 A 100 1.0–1.6 *Note for liquid cooled torches: To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes. Order numbers complete torches Type MB GRIP 401 D SC; Central adaptor WZ-2; PVC MB GRIP 401 D SC; Central adaptor WZ-2; BRH MB GRIP 501 D SC; Central adaptor WZ-2;...