Catalog excerpts
Occupational and safety shoes
Open the catalog to page 1Head office: St. Ingbert/ Germany Participation in trade fairs: Germany: A+A France: Expo Protection Great Britain: Safety & Health Expo Poland: ITM/ SAWO Czech Republic: Interprotec Production range: Occupational and safety shoes for: Kitchen units Laboratories Hospitals Electrical industry (ESD-shoes) Doctor‘s offices Pharmaceutical industry Research institutes Food industry Biotechnology etc. PROTEKTOR-Group: Protektor S.A., Lublin Prabos Plus A.s., Slavičín ABEBA GmbH, St. Ingbert ABEBA France sarl., Saargemünd ABEBA Spezialschuhausstatter GmbH Schlackenbergstrasse 5 D-66386 St. Ingbert...
Open the catalog to page 2Headquarter and distribution centre in St. Ingbert Dear business partners, dear customers, your confidence in us as a manufacturer of safety and obligation to produce and sell modern safety and occu- occupational shoes honours us and confirms our philoso- pational shoes according to the European standard for phy of bringing together protective function, the highest our customers meanwhile in more than thirty countries. possible wearing comfort as well as a healthy foot clima- ABEBA Comfort Shoes are exclusively available at spe- te. Be assured that we do not relent in our continuous...
Open the catalog to page 3Berufs- und Sicherheitsschuhe Occupational Shoes HiGH ORIGINAL REFLEXOR REFLEXOR COMFORT BUSINESS LADY STATIC CONTROL CLEAN ROOM CLEAN ROOM CLEAN ROOM
Open the catalog to page 4Safety Shoes CLASSIC STATIC CONTROL ORTHOstat/ SENSOstat Standards/ Technology Technical information ATEX/ HACCP
Open the catalog to page 5Factors influencing Electrostatic charge and discharge ESD Electrostatic Discharge Shoes are classed as ESD shoes when the on-state resistance Climatic conditions (humidity, temperature) value of the system person-shoe-floor is under 3,5 x 107 or 35 MOhm according to EN 61340-5-1 (verification). The qualifica- Speed of separation of parts tion of the shoes is made depending on the climate classifications 1 (15% relative humidity), 2 (25% relative humidi- ty) and 3 (50% relative humidity) according to EN 61340-4-3 < 108 Ohm. Electrical resistance of the surface Material and construction of...
Open the catalog to page 6Technical Information When setting up an “EPA area”, the following question should always be asked: how many volts can the component withstand? Because it requires only approximately: Electrostatic discharge is caused by an imbalance of potential on 3000 Volt, let man having a disagreeable sensations to 100 Volt, delete information from a magnetic data to carrier charged objects or people by contact or close proximity. ESDS Electrostatic Discharge Sensitive Device 50 Volt, generate sparks which can ignite explosive to gases EPA Electrostatic Protected Area 30 Volt, damage electrical...
Open the catalog to page 7Ignition source electrostatic discharge ATEX - ABEBA - for explosive areas ATEX = ATmosphère EXplosible (explosive atmosphere) The electrostatic discharge is caused by an imbalance of potential on charged objects or people. A human body which is not provided with an ATEX/ ESD-shoe can be charged up to several kilovolts (kv). This generated charge can be decreased by the Accidents at work in explosive areas (EX-areas) mostly cause bigger use of ATEX/ ESD-shoes. One way to estimate the risk of elec- consequences than in other areas. That’s why it is even more im- trostatic discharge is to...
Open the catalog to page 8HACCP HACCP – Hazard Analysis Critical Control Points – is a monitoring system using risk analysis. This serves to identify, assess and combat major health risks cansed by foodstuffs. In the production, treatment and processing of foodstuffs, all possible effects which might cause health problems by eating such food must be eliminated from the very beginning. More information is available on your local HACCP website. ABEBA Shoes are manufactured using only materials fully certified and approved by us. With this comprehensive quality assurance, we guarantee that no materials susceptible to...
Open the catalog to page 9Individual and certified. ORTHOstat is the latest individual orthopaedic insole from ABEBA according to EN ISO 20345:2007 and 20347:2007. Do you wear certified shoes and need an individually customised orthopaedic insole? The BG Regulation 191 revised in 2007 prescribes that shoes used with customised orthopaedic insoles still have to meet the require- The foot is the foundation of your body Many joints responsible for your ability to move are placed between the head and feet. Some of them can cause problems over the course of your life. Often it is “only” a faulty position of the foot...
Open the catalog to page 10SENSOstat This is how the sensorimotor insole works The stimulation areas on the custom-made insole work like reminders – like positive and repetitive prompts. They send signals via the feet to your brain stem to get it to change the nerve connections. The effects: The joints are being relieved The muscles are being strengthened Body posture and gait pattern are being improved Triggering the brain by means of stimulation areas S traightening up due to “Relearning”, motion sequence is being reprogrammed into the brain stem S elective impulses are being used to positively influence...
Open the catalog to page 11Occupational Shoes HIGH ORIGINAL CE SRC slip resistance according to EN ISO 20347:2007 Upper leather Heel patch leather S anitized® treated (odor and bacteria resistant) Animal fats, oil and fuel resistant TÜV GS - tested safety ESD dissipative according to DIN EN 61340 An all-rounder for the highest quality, comfort and design demands, which won‘t let you down on difficult floors thanks to its high resistance to slip. Whether conventional, colourful or with smart design the high Original is always the right choice for work or leisure time. Every buckle is corrosion-resistant and...
Open the catalog to page 12CE, EN ISO 20347:2007 OB, A, E, FO, SRC* smooth leather white // heel patch leather // heel strap foldable, adjustable // instep area cushioned // PU-outsole // wedge heel 45 mm CE, EN ISO 20347:2007 OB, A, E, FO, SRC* smooth leather black // heel patch leather // heel strap foldable, adjustable // instep area cushioned // PU-outsole // wedge heel 45 mm CE, EN ISO 20347:2007 OB, A, E, FO, SRC* smooth leather white, perforated // heel patch leather // heel strap foldable, adjustable // PU-outsole // wedge heel 45 mm CE, EN ISO 20347:2007 OB, A, E, FO, SRC* smooth leather black, perforated //...
Open the catalog to page 13All ABEBA catalogs and technical brochures
-
Fit for Job Gastro
32 Pages
-
Fit for Job Medicine
32 Pages
-
Fit for Job ESD
32 Pages
-
Dynamic Flow
4 Pages
-
Atex shoes
12 Pages
-
Safety shoes 7.16
96 Pages
-
Occupational Shoes 7.16
128 Pages
-
ABEBA catalog
112 Pages
-
32600 safety shoes
1 Pages