CIRCULAR VIBRATORS Circular vibrators or vibratory bowls are mass finishing equipment used for deburring and polishing processes, components free in the bowl. The vibration movement of the circular vibrators is tridimensional ; it is a rotation along an horizontal axis, generating a kind of spiral. The vibration generator of the circular vibrators consists of a motor with vertical shaft, a set of holding springs and eccentric plates that are mounted to the top and bottom of the drive shaft. Changing the weight of the eccentric plates will change the bowl's amplitude. Also, bowl's springs will determine the amplitude and vibration mode. Vibrators may be completed by screening system in order to separate chips from pieces, as well as dosing pumps to add continuously different compounds. Technical details of the most frequent equipment : Model Separator Capacity (liters) Weight (Kg) VibC 25 25 85 ABC SwissTech Switzerland : Eplatures-grise 17 - CH-2300 La Chaux de Fonds Tél : +41 32 930 2950 - Fax : +41 32 930 2930 France : 14 rue du clos jeantot – 25500 Montlebon Tél : +33 6.8219.2464 [email protected] www.abcswisstech.com