CENTRIFUGAL DISKS Centrifugal disk is mainly composed of a motor, a process tank with a polyurethane coating. The working tank consists of two parts : the upper part is fixed and the down part or plate is rotating. An appointed gap seal, separates these two parts. It must be rigorously controlled ; finally, using abrasive or parts whose size approaches that of the joint must be absolutely avoided . During treatment, the movement of the workpieces is toroidal, due to the plate movement. The energy generated by this type of equipment is approximately 5 times greater than in a vibrator. However, it is about 5 times lower than in centrifugal barrel, which have not the disadvantage of having a seal to maintain. Technical details of the most frequent equipment : Model Capacity (liters) ABC SwissTech Switzerland : Eplatures-grise 17 - CH-2300 La Chaux de Fonds Tél : +41 32 930 2950 - Fax : +41 32 930 2930 France : 14 rue du clos jeantot – 25500 Montlebon Tél : 06.8219.2464 [email protected] www.abcswisstech.com