*mydirectindustry

DPA UPScale ST 10–200kW

Product catalog summary

Overview: The DPA UPScale ST is a modular UPS system designed by ABB for low to medium power applications, offering scalable power protection from 10 kW to 200 kW per system, with the ability to parallel up to 400 kW. It is ideal for high-density applications requiring an all-in-one solution.

Key Features:

Online double conversion UPS with power range from 10 kW to 200 kW in a single frame.
Redundant capacity (N+1) per frame and up to four frames in parallel.
Online swap modularity (OSM) and up to 96% online efficiency.
Eco-mode efficiency ≥ 98% and low input harmonic distortion (THDi < 3%).
High power density (472 kW/m²) and flexible battery configuration.
Remote control and monitoring options available.

Decentralized Parallel Architecture (DPA): Each UPS module operates autonomously with all necessary hardware and software, eliminating single points of failure. In case of a module failure, the system continues to operate normally by isolating the failed module.

Benefits:

High availability with redundancy and load sharing among modules.
Double conversion topology for clean output voltage.
Minimized service time with online-swappable modules.
Standardized solution reducing maintenance and spare part stock.
Swiss-built quality ensuring reliability and thorough testing.

Cost Efficiency:

Modularity allows easy power capability upgrades and optimized battery capacity.
Small footprint saves valuable floor space.
Reduced installation and maintenance costs with standardized modules.
Energy-efficient design for cost savings in all working regimes.

Technical Specifications:

System power range: 10–400 kW with nominal power per module of 10 kW/20 kW.
Input voltage: 3 × 380/220 V + N, 3 × 400/230 V + N, 3 × 415/240 V + N.
Output voltage: 3 × 380/220 V + N, 3 × 400/230 V + N, 3 × 415/240 V + N.
Overall efficiency up to 96%, eco-mode efficiency 98%.
Operating temperature: 0 °C to +40 °C, storage temperature: −25 °C to +70 °C.
Compliance with IEC/EN 62040 standards and CE certification.

Applications: Suitable for small- to medium-sized critical power IT applications, including building management systems (BMS) for large facilities, ensuring operational efficiency and safety.

Catalog excerpts

— DPA UPScale ST 10 – 200 kW The modular UPS designed for low and medium power applications DPA UPScale ST 10 – 200 kW The modular UPS designed for low and medium power applica

Open the catalog to page 1

— DPA UPScale ST – always protection your critical applications Up to modules in parallel per cabinet System display Up to modules in parallel per system total system power Customer input and output interfaces footprint only All-in-one power protection solution ABB’s DPA UPScale ST is available for high density applications requiring an all-in-one power protection solution that includes UPS modules, maintenance bypass, batteries, I/O terminals and communications. A single system delivers power protection from 10 kW to 200 kW in 10 kW or 20 kW modular steps. For a continuously growing midsized...

Open the catalog to page 2

— DPA – The best way to maximize power availability and minimize TCO — 01 In DPA, each UPS module has all the hardware and software it needs for autonomous operation. Decentralized Parallel Architecture ABB’s DPA UPScale ST optimizes availability and total cost of ownership (TCO). The UPS design is based on the concept of true redundancy. Each UPS module has all the hardware and software needed for autonomous operation. With all the critical components duplicated and distributed between individual units, potential single points of failure are eliminated. In the unlikely event of one UPS module...

Open the catalog to page 3

— DPA UPScale ST Available models Cabinet type Number of modules per cabinet Parallel frames per system Max. number of modules per system Max. total system capacity w /o redundancy — The ideal solution for small- to medium-sized critical power IT applications The DPA UPScale ST can be deployed in a variety of small- to medium-sized system architectures. In addition to traditional server load applications, the DPA UPScale ST is ideal to protect critical applications such as building management systems (BMS). Large facilities are often provided with BMS to control and monitor the building’s mechanical...

Open the catalog to page 4

— DPA UPScale ST Technical specifications General data System power range Nominal power per module Nominal power / frame Number of UPS modules Max. number of inbuilt batteries (7 / 9 Ah) Output power factor Online double conversion Parallel configuration Modular (Decentralized Parallel Architecture) Input Nominal input voltage Voltage tolerance (referred to 3 × 400 / 230 V) Input distortion THDi Power factor Output Rated output voltage Voltage distortion (referred to 3 × 400 / 230 V) Overload capability Unbalanced load 100% (all three phases regulated independently) Crest factor Efficiency Overall...

Open the catalog to page 5

— ABB Power Protection SA Via Luserte Sud 6572 Quartino Switzerland © Copyright 2017 ABB. All rights reserved. Specifications subject to change without notice. © Copyright ABB. All rights reserved. Specifications subject to change without notice.

Open the catalog to page 6

All ABB UPS and power conditioning products catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list