DPA UPScale ST 10–200kW
1 / 6Pages

— DPA UPScale ST 10 – 200 kW The modular UPS designed for low and medium power applications DPA UPScale ST 10 – 200 kW The modular UPS designed for low and medium power applica

— DPA UPScale ST – always protection your critical applications Up to modules in parallel per cabinet System display Up to modules in parallel per system total system power Customer input and output interfaces footprint only All-in-one power protection solution ABB’s DPA UPScale ST is available for high density applications requiring an all-in-one power protection solution that includes UPS modules, maintenance bypass, batteries, I/O terminals and communications. A single system delivers power protection from 10 kW to 200 kW in 10 kW or 20 kW modular steps. For a continuously growing...

— DPA – The best way to maximize power availability and minimize TCO — 01 In DPA, each UPS module has all the hardware and software it needs for autonomous operation. Decentralized Parallel Architecture ABB’s DPA UPScale ST optimizes availability and total cost of ownership (TCO). The UPS design is based on the concept of true redundancy. Each UPS module has all the hardware and software needed for autonomous operation. With all the critical components duplicated and distributed between individual units, potential single points of failure are eliminated. In the unlikely event of one UPS...

— DPA UPScale ST Available models Cabinet type Number of modules per cabinet Parallel frames per system Max. number of modules per system Max. total system capacity w /o redundancy — The ideal solution for small- to medium-sized critical power IT applications The DPA UPScale ST can be deployed in a variety of small- to medium-sized system architectures. In addition to traditional server load applications, the DPA UPScale ST is ideal to protect critical applications such as building management systems (BMS). Large facilities are often provided with BMS to control and monitor the building’s...

— DPA UPScale ST Technical specifications General data System power range Nominal power per module Nominal power / frame Number of UPS modules Max. number of inbuilt batteries (7 / 9 Ah) Output power factor Online double conversion Parallel configuration Modular (Decentralized Parallel Architecture) Input Nominal input voltage Voltage tolerance (referred to 3 × 400 / 230 V) Input distortion THDi Power factor Output Rated output voltage Voltage distortion (referred to 3 × 400 / 230 V) Overload capability Unbalanced load 100% (all three phases regulated independently) Crest factor Efficiency...

— ABB Power Protection SA Via Luserte Sud 6572 Quartino Switzerland © Copyright 2017 ABB. All rights reserved. Specifications subject to change without notice. © Copyright ABB. All rights reserved. Specifications subject to change without notice.