Conceptpower DPA 500 - The modular UPS ? now up to 3 MW
8Pages

Modular three-phase UPS system

The lowest total cost of ownership The Conceptpower DPA 500 boasts the lowest cost of ownership of any UPS system by offering energy efficiency, scalability and ergonomic design to enable easy serviceability. It can be sized to align closely with prevailing IT requirements, but can be added to incrementally as IT needs grow. This means that you only power and cool what you need. The resulting savings in power usage over the service life of the UPS are substantial. Rack-mounted configurations can be right-sized by inserting or removing ‘online-swappable’ modules while the systems remain...

Protecting power has never been easier True, online-swap modularity enables the safe removal and / or insertion of Conceptpower DPA modules without risk to the critical load and without the need to power down or transfer to raw mains supply. This unique feature directly addresses today’s requirement for continuous uptime. The ability to online-swap modules in a Conceptpower DPA system significantly reduces its mean time to repair (MTTR) and simplifies system upgrades. The modular approach pays off too when it comes to serviceability and availability – online swapping of modules means you...

Availability Mean time between failures (MTBF) and mean time to repair (MTTR) are common parameters in the UPS industry and both impact system availability. Modular UPS designs minimizes the system‘s MTTR. ABB’s Decentralised Parallel Architecture allows the modules to work as one system but without interdependence. In the unlikely event that one UPS module were to fail, the overall system will continue to operate normally, but with one module fewer of capacity. The failed module is fully disconnected and cannot impact the operating modules. Quick and simple repair by swapping modules,...

Technical specifications GENERAL DATA System power range Nominal power / module Nominal power / frame Output power factor Double conversion, transformer-free, modular, Decentralized Parallel Architecture Parallel configuration Up to 5 modules in one frame (500 kW) / up to 6 frames in parallel (3 MW) Cable entry Fully front serviceable Back-feed protection INPUT Nominal input voltage Voltage tolerance (referred to 400 / 230 V) Input distortion THDi Frequency range Power factor Walk in / Soft start OUTPUT Rated output voltage Voltage tolerance < ±1 % with static load / < ±4 % with step load...

Uninterrupted uptime for Tier IV Data Centers Our modern society is now largely built on a foundation of data. Health authorities, banks, government departments, retail outlets and almost every other organization that touches our lives rely on the safe storage of enormous amounts of data. And safe data storage needs a rock-solid supply of power such as that shown in this reference example. In a Tier 4 data center, it must be possible to undertake infrastructure work without disrupting the critical load. This requires simultaneously active distribution paths, typically in a system + system...

The UPS for those who need zero downtime ABB’s Conceptpower DPA 500 is a high-power, modular and transformer-free UPS system for organizations who need zero downtime. The UPS is built using true online double conversion technology and provides low cost of ownership. True modularity up to 3 MW Now you can have a UPS size to exactly fit your needs: The Conceptpower DPA 500 is the only modular UPS on the market that can easily be scaled up to provide 3 MW of clean, reliable power. This scalability means that there is no need to over-specify the original configuration as power modules can...

www.abb.com/ups ups.sales@ch.abb.com © Copyright ABB. All rights reserved. Specifications subject to change without notice.