Robotics Paint A highly efficient paint robot with high acceleration, high load capacity, large work envelope and integrated process equipment. It saves cycle time and it saves paint. A powerful workhorse The IRB 5400 is a unique paint robot with high acceleration and speed, combined with the ability to carry heavy loads. It gives you short cycle times and increased production. The extensive load capacity enables us to put the process equipment close to the applicator to reduce waste. Powered by IPS The integrated process system (IPS) integrates the paint application equipment in the robot arm. With color change valves and paint pumps close to the paint wrist, the result is reduced material consumption and significant paint savings. Air- and fluid regulation, pilot valves, flow sensors, bell speed-and high voltage control are also integrated in the robot, making installation, set up and process tuning fast and easy. Paint robot control system The IRB 5400 uses the IRC5P paint robot control system. It is specifically designed for the paint shop with its user friendly Ex FlexPaint Pendant and RobView 5 - our paint cell software for supervision, control and diagnostics, and our powerful software tools for off-line programming and process tuning. Add a rail for coating large objects The IRB 5400 can be mounted on a trolley for operating on a rail. There are two types of foot for the trolley. The clean wall foot is used when the trolley and rail is located outside the spray booth. This enables for an easy-to-clean inner spray booth wall. The in-booth foot enables the complete rail and trolley to be located inside the spray booth. This design is typically used for retrofit in existing spray booths or for spray booths with limited space.

Designed for paint savings The IRB 5400 is ‘Powered by IPS’, ABB’s high speed integrated process system for closed loop air- and paint flow regulation and control. Specification Number of axes 6 axes. 7 when rail-mounted Robot mounting Floor and rail Load capacity on vertical arm 65 kg Load capacity on horizontal arm 70 kg (including wrist payload) Ingress protection degree IP67, wrist IP54 Robot unit ambient temperature +5°C to +45°C* Relative humidity, non-condensing 95% maximum Physical Robot footprint Performance Axis: Rotation Vertical arm Horizontal arm Inner wrist Wrist...