ABB MEASUREMENT & ANALY TICS | DATA SHEET LP Linear pneumatic piston actuator

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G Measurement made easy Cylinder actuators • High resolution, sensitivity and fast response • Cylinders available with Buna-N® or Viton® seals • Suitable for high temperature applications • Easy adaptability to air dampers and louvers • Drop-in replacement for many older piston actuators • Available with 4 to 20 mA position feedback • Digital features with TZIDC positioner • Explosion proof application with TZIDC-200 positioners • Communication with HART®/FOUNDATION Fiel

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — Cylinder actuators from 63.5 mm (21/2 in) dia. × 127 mm (5 in ) stroke to 254 mm (10 in) dia. × 406.4 mm (16 in) stroke Linear pneumatic (LP) piston actuators are typically used to control the position of airflow regulating dampers, butterfly valves, and other similar process regulating devices on furnaces, boilers and air distribution systems. They are most often used on boiler secondary air (windbox) dampers in NOx reduction control systems. The LP air cylinders are available with either Buna-N nitrile rubber seals or with...

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — Suggested maximum operating force at minimum and maximum supply pressure Note. The torque calculation values are provided based on the stroke length of the LP and the required lever arm dimension for 90° damper travel. LP10 Cylinder diameter × length Cylinder diameter × length Cylinder diameter × length Lever for 90° Cylinder diameter × length Cylinder diameter × length Lever for 90° LP60 Cylinder diameter × length Lever for 90°

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — Positioner options for LP actuator The following overview provides brief information on the positioner that can be selected with the LP actuator – see Positioner type on page 22 . AV15 Input: 0.2 to 1 bar (3 to 15 psi) Max. supply pressure: 10 bar (145 psi) Temperature limits: 121 °C (250 °F) max. Model code of AV15 used in LP: AV152000_ AV16 Input: 0.2 to 1.86 bar (3 to 27 psi) Max. supply pressure: 10 bar (145 psi) Temperature limits: 121 °C (250 °F) max. Model code of AV16 used in LP: AV162000_ AV23 Input: 4 to 20 mA Max....

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Positioner options for LP actuator TZIDC-220 Input: FOUNDATION Fieldbus Max. supply pressure: 6 bar (90 psi) Temperature limits: –40 to 85 °C (–40 to 185 °F) Loss of input signal action: Fail-safe Model code of TZIDC in LP: V18350.20.1.2.3.3._ _.1.0 TZIDC-220 Input: FOUNDATION Fieldbus Max. supply pressure: 6 bar (90 psi) Temperature limits: –40 to 85 °C (–40 to 185 °F) Loss of input signal action: Fail-in-place Model code of TZIDC in LP: V18350.20.1.2.4.3._ _.1.0 EDP300 Input: 4 to 20 mA (HART) Max. supply pressure: 10 bar...

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — Dimensions LP10 actuator fitted with TZIDC positioner with equalizing manifold All dimensions in mm (in) TZIDC positioner

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP20 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in)

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP20 actuator fitted with AV positioner without manifold All dimensions in mm (in)

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP30 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in) 609.6 (24.0) clearance to remove cover

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP30 actuator fitted with TZIDC positioner without manifold All dimensions in mm (in) TZIDC positioner 609.6 (24.0) clearance to remove cover

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP32 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in) 609.6 (24.0) clearance to remove cover

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP32 actuator fitted with TZIDC positioner without manifold All dimensions in mm (in) TZIDC positioner 609.6 (24.0) clearance to remove cover

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP40 actuator fitted with TZIDC positioner without manifold All dimensions in mm (in) TZIDC positioner 609.6 (24.0) clearance to remove cover

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP40 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in) 609.6 (24.0) clearance to remove cover

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP50 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in) 609.6 (24.0) clearance to remove cover

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP50 actuator fitted with TZIDC positioner without manifold All dimensions in mm (in) TZIDC positioner 609.6 (24.0) clearance to remove cover

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — …Dimensions LP60 actuator fitted with TZIDC positioner without manifold All dimensions in mm (in) TZIDC positioner 609.6 (24.0) clearance to remove cover

LP L I N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G LP60 actuator fitted with AV positioner with equalizing manifold All dimensions in mm (in) 609.6 (24.0) clearance to remove cover

LP LI N EAR P N EUMAT I C P I STON AC TUATORS | DS/LP-E N RE V. G — Accessories Base mount pivot bracket (LP10 and LP20) All dimensions in mm (in) Part no. 353E435U04 (for LP10 and LP20) Material – cast steel Finish – black oxide Note.  Pivot bracket pins are sold separately from pivot brackets Base mount pivot bracket (LP30 to LP60) All dimensions in mm (in) DD diameter BA Material – cast steel Finish – black oxide Note.  Pivot bracket pins are sold separately from pivot brackets